TSOP2137 View Datasheet(PDF) - Vishay Semiconductors
Part Name
Description
Manufacturer
TSOP2137 Datasheet PDF : 8 Pages
| |||
New TSOP21..
Vishay Semiconductors
IR Receiver Modules for
Remote Control Systems
ABSOLUTE MAXIMUM RATINGS (1)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Supply voltage (pin 2)
Supply current (pin 2)
Output voltage (pin 1)
Voltage at output to supply
Output current (pin 1)
Junction temperature
Storage temperature range
Operating temperature range
Power consumption
Soldering temperature
Tamb ≤ 85 °C
t ≤ 10 s, 1 mm from case
VS
- 0.3 to + 6.0
V
IS
5
mA
VO
- 0.3 to 5.5
V
VS - VO
- 0.3 to (VS + 0.3)
V
IO
5
mA
Tj
100
°C
Tstg
- 25 to + 85
°C
Tamb
- 25 to + 85
°C
Ptot
10
mW
Tsd
260
°C
Note
(1) Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating condtions for extended periods may affect the device reliability.
ELECTRICAL AND OPTICAL CHARACTERISTICS (1)
PARAMETER
TEST CONDITION
SYMBOL
Supply current (pin 2)
Supply voltage
Transmission distance
Output voltage low (pin 1)
Ev = 0, VS = 5 V
Ev = 40 klx, sunlight
Ev = 0, test signal see fig. 1,
IR diode TSAL6200,
IF = 400 mA
IOSL = 0.5 mA, Ee = 0.7 mW/m2,
test signal see fig. 1
ISD
ISH
VS
d
VOSL
Minimum irradiance
Pulse width tolerance:
tpi - 5/fo < tpo < tpi + 6/fo,
test signal see fig. 1
Ee min.
Maximum irradiance
tpi - 5/fo < tpo < tpi + 6/fo,
test signal see fig. 1
Ee max.
Directivity
Angle of half transmission distance
ϕ1/2
Note
(1) Tamb = 25 °C, unless otherwise specified
MIN.
0.65
2.7
30
TYP.
0.85
0.95
45
0.17
± 45
MAX.
1.05
5.5
100
0.35
UNIT
mA
mA
V
m
mV
mW/m2
W/m2
deg
TYPICAL CHARACTERISTICS
Tamb = 25 °C, unless otherwise specified
Ee
Optical Test Signal
(IR diode TSAL6200, IF = 0.4 A, N = 6 pulses,
f = f0, t = 10 ms)
t
tpi *)
T
*) tpi 6/fo is recommended for optimal function
VO
VOH
Output Signal
1 ) 3/f0 < td < 9/f0
2 ) tpi - 4/f0 < tpo < tpi + 6/f0
14337
VOL
td1 )
tpo2 )
t
Fig. 1 - Output Active Low
0.35
0.30
0.25
Output Pulse Width
0.20
0.15
Input Burst Length
0.10
0.05
λ = 950 nm,
Optical Test Signal, Fig.1
0
0.1
1
10
102 103
104
105
21391_1
Ee - Irradiance (mW/m²)
Fig. 2 - Pulse Length and Sensitivity in Dark Ambient
www.vishay.com
80
Document Number: 82094
Rev. 2.1, 18-Jul-08
Share Link: 