Philips Semiconductors
Photodiode and amplifier IC
for CD and DVD applications
Preliminary specification
TZA1046
12.2 Test mode description
Alignment of the diodes during OPU manufacturing requires the availability of all satellite outputs. In normal mode the
F and H channels are combined to a single output FH and the E and G channels are combined to a single output EG.
This is done to switch off two channels in the normal mode (application usage) which saves power consumption. For
alignment of the diodes each individual satellite output must be available and therefore the TZA1046 can be put in a test
mode where all satellite channels are available. The test mode is activated by pulling the R/W digital input pin above the
supply (2 to 2.5 V higher than VDD1), by forcing an input current into this pin (800 to 1200 µA) or by leaving the pin
open-circuit. Fig.7 shows the R/W input configuration.
handbook, full pagewidth
VDD2
3
VDD1
14
1 kΩ
350
kΩ
11
R/W input
GND
150
kΩ
6
300
kΩ
100
kΩ
100
kΩ
6 kΩ
1
+1
100 Ω
8-channel
test mode
+1
1
1
1
R/W internal
40 kΩ
Fig.7 R/W input configuration.
MDB576
2004 May 04
18