µPD16750
Electrical Characteristics (TA = –10 to +75°C, VDD1 = 3.3 V ± 0.3 V, VDD2 = 9.0 V ± 0.5 V, VSS1 = VSS2 = 0 V)
Parameter
Symbol
Condition
MIN.
TYP.
MAX.
Unit
Input Leak Current
IIL
±0.1
±1.0
µA
High-Level Output Voltage
VOH STHR (STHL), IOH = 0 mA
VDD1 – 0.1
VDD1
V
Low-Level Output Voltage
VOL STHR (STHL), IOL = 0 mA
0
0.1
V
γ -Corrected Supply Current
Iγ
V0 to V7 = V8 to V15 V0 pin, V8 pin
225
450
900
µA
Driver Output Current
= 4.0 V
V7 pin, V15 pin
–900
–450
–225
µA
IVOH
VX = 7.0 V, VOUT = 6.5 VNote
–185
–90
µA
IVOL
VX = 1.0 V, VOUT = 1.5 VNote
120
238
µA
Output Voltage Deviation
∆VO VO = 0.2 V to 1.2 V
±30
±50
mV
VO = VDD2 – 1.2 V to VDD2 – 0.2 V
VO = 1.2 V to 0.5 VDD2 – 0.3 V
±10
±20
mV
VO = 0.5 VDD2 to VDD2 – 1.2 V
Output Swing Difference
∆VP–P VO = 0.2 V to 0.8 V
±20
±40
mV
Deviation
VO = VDD2 – 0.8 V to VDD2 – 0.2 V
VO = 0.8 V to 1.2 V
±10
±20
mV
VO = VDD2 – 1.2 V to VDD2 – 0.8 V
VO = 1.2 V to 0.5 VDD2 – 0.3 V
±3
±10
mV
VO = 0.5 VDD2 to VDD2 – 1.2 V
Output Swing Average
AVO VDD2 = 8.5 V, V0 = 7.9 V, V3 = 6.22 V,
4.433
4.440
4.447
V
Difference Deviation
V7 = 4.0 V, V8 = 4.0 V, V12 = 1.78 V,
V12 = 0.1 V, V1, V2, V4, V5, V6, V9, V10,
V11, V13, V14 : Open, TA = 25°C,
Input data: 80 H
Output Voltage Range
VO
0.2
VDD2 – 0.2
V
Logic Part Dynamic Current
IDD1 VDD1, with no load
0.8
6.0
mA
Consumption
Driver Part Dynamic Current
IDD2 VDD2, with no load
Consumption
Note VX refers to the output voltage of analog output pins S1 to S384.
VOUT refers to the voltage applied to analog output pins S1 to S384.
4.5
11.0
mA
Cautions 1. The STB cycle is defined to be 20 µs at fCLK. = 40 MHz.
2. The TYP. values refer to an all black or all white input pattern. The MAX. value refers to the
measured values in the dot checkerboard input pattern.
3. Refers to the current consumption per driver when cascades are connected under the
assumption of XGA single-sided mounting (8 units).
Data Sheet S13719EJ4V0DS00
17