VIPER53-E View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
VIPER53-E Datasheet PDF : 36 Pages
| |||
VIPer53 - E
1
Electrical data
Electrical data
1.1
Maximum rating
Stressing the device above the rating listed in the “Absolute Maximum Ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of
this specification is not implied. Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
Table 1. Absolute maximum rating
Symbol
Parameter
Value
Unit
VDS Continuous drain source voltage (TJ= 25 ... 125°C) (1)
-0.3 ... 620
V
ID
Continuous drain current
Internally limited A
VDD Supply voltage
0 ... 19
V
VOSC OSC input voltage range
0 ... VDD
V
ICOMP
ITOVL
COMP and TOVL input current range (1)
-2 ... 2
mA
VESD
Electrostatic discharge:
Machine model (R = 0Ω; C = 200pF)
Charged device model
200
V
1.5
kV
TJ Junction operating temperature
Internally limited ° C
TC Case operating temperature
-40 to 150
°C
TSTG Storage temperature
-55 to 150
°C
1. In order to improve the ruggedness of the device versus eventual drain overvoltages, a resistance of 1kΩ
should be inserted in series with the TOVL pin.\
1.2
Thermal data
Table 2. Thermal data
Symbol
Parameter
PowerSO-10 (1) DIP-8 (2) Unit
RthJC Thermal Resistance Junction-case
Max
2
20
° C/W
RthJA Thermal Resistance Ambient-case
Max
60
80
° C/W
1. When mounted on a standard single-sided FR4 board with 50mm² of Cu (at least 35 mm thick) connected
to the DRAIN pin.
2. When mounted on a standard single-sided FR4 board with 50mm² of Cu (at least 35 mm thick) connected
to the device tab.
3/36
Share Link: 