CXA2560 View Datasheet(PDF) - Sony Semiconductor
Part Name
Description
Manufacturer
CXA2560 Datasheet PDF : 19 Pages
| |||
CXA2560Q
5. Operating mode control method
The CXA2560Q has a Dolby NR switch (NRSW), mute switch (MUTESW), playback equalizer amplifier select
switch (TAPESW), head input select switch (DRSW), music sensor mode select switch (MSMODE) and music
sensor switch (MSSW).
The operating modes for each switch are shown in the following table.
Pin No.
Pin name
16 NRSW
17 MUTESW
18 TAPESW
19 DRSW
20 MSMODE
21 MSSW
Pin voltage
Low (OPEN)
High
Dolby NR OFF
Dolby NR ON
MUTE OFF
MUTE ON
70µs
120µs
PBIN FORWARD
PBIN REVERSE
G1
G2
MS ON
MS OFF
Notes on Operation
1. DIREF pin resistance
The current on DIREF (Pin 25) is the reference for the Dolby NR static characteristic, playback equalizer
amplifier resistor 7kΩ/12kΩ and the comparator threshold value of the music sensor.
Use the resistor with high accuracy for connecting to the DIREF pin.
(The resistance accuracy of 2% <metal-oxide> is recommended.)
2. Dolby NR
The Dolby NR attack/recovery time is determined by the capacitance connected to TCH (Pins 8 and 23).
Use the parts, connected to these pins, with high accuracy and small temperature characteristics.
(The capacitance accuracy of 10% <film> is recommended.)
3. Playback equalizer amplifier
The playback equalizer amplifier characteristics are determined by the resistor connected between the IC
internal resistor and PBFB (Pins 31 and 40) and the capacitor connected between PBFB and PBTC (Pins 1
and 30). Use the parts which satisfies the accuracy required for the playback equalizer amplifier.
4. Music sensor
The resistance and capacitance connected to G2FB (Pin 11) and G1FB (Pin 12) determine the detection
level and high-frequency cut-off.
The response time is determined by the resistance and capacitance connected to MSTC (Pin 13).
Use the parts which satisfies the accuracy required for the music sensor.
– 15 –
Share Link: 