CS8151YNF16 View Datasheet(PDF) - ON Semiconductor
Part Name
Description
Manufacturer
CS8151YNF16
ON Semiconductor
CS8151YNF16 Datasheet PDF : 16 Pages
| |||
CS8151
5.0 V, 100 mA Low Dropout
Linear Regulator with
Watchdog, RESET,
and Wake Up
The CS8151 is a precision 5.0 V, 100 mA micro−power voltage
regulator with very low quiescent current (400 mA typical at 200 mA
load). The 5.0 V output is accurate within ±2% and supplies 100 mA
of load current with a typical dropout voltage of 400 mV.
Microprocessor control logic includes Watchdog, Wake Up and
RESET. This unique combination of low quiescent current and full
microprocessor control makes the CS8151 ideal for use in battery
operated, microprocessor controlled equipment.
The CS8151 Wake Up function brings the microprocessor out of
Sleep mode. The microprocessor in turn, signals its Wake Up status
back to the CS8151 by issuing a Watchdog signal.
The Watchdog logic function monitors an input signal (WDI) from
the microprocessor. The CS8151 responds to the falling edge of the
Watchdog signal which it expects at least once during each wake−up
period. When the correct Watchdog signal is received, a falling edge is
issued on the wake−up signal line.
RESET is independent of VIN and operates correctly to an output
voltage as low as 1.0 V. A RESET signal is issued in any of three
situations. During power up the RESET is held low until the output
voltage is in regulation. During operation if the output voltage shifts
below the regulation limits, the RESET toggles low and remains low
until proper output voltage regulation is restored. And finally, a
RESET signal is issued if the regulator does not receive a Watchdog
signal within the Wake Up period.
The RESET pulse width, Wake Up signal frequency, and Wake Up
delay time are all set by one external capacitor CDelay.
The regulator is protected against short circuit, over voltage, and
thermal runaway conditions. The device can withstand 74 V peak
transients, making it suitable for use in automotive environments.
Features
• 5.0 V ± 2%/100 mA Output Voltage
• Micropower Compatible Control Functions
♦ Wake Up
♦ Watchdog
♦ RESET
• Low Dropout Voltage: 400 mV @ 100 mA
• Low Sleep Mode Quiescent Current (400 mA Typ)
• Protection Features
♦ Thermal Shutdown
♦ Short Circuit
♦ 74 V Peak Transient Capability
♦ Reverse Transient (−50 V)
• Internally Fused Leads in PDIP−16 and SO−16L Packages
• Pb−Free Packages are Available
© Semiconductor Components Industries, LLC, 2005
1
September, 2005 − Rev. 15
http://onsemi.com
1
7
1
TO−220−7
T SUFFIX
CASE 821E
TO−220−7
TVA SUFFIX
CASE 821J
1
7
1
7
8
1
16
1
16
1
TO−220−7
THA SUFFIX
CASE 821H
D2PAK−7
DPS SUFFIX
CASE 936AB
PDIP−8
N SUFFIX
CASE 626
PDIP−16
NF SUFFIX
CASE 648
SO−16L
DWF SUFFIX
CASE 751G
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 10 of this data sheet.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 11 of this data sheet.
Publication Order Number:
CS8151/D
Share Link: