1210C View Datasheet(PDF) - Frontier Electronics.
Part Name
Description
Manufacturer
1210C Datasheet PDF : 3 Pages
| |||
1210C Series – SMD WIRE WOUND CERAMIC CHIP INDUCTORS
Rev. A
C. Color coding:
1. Parts are marked with 3 color dots. The table below shows the significance of each color.
2. Dots 1 and 2 indicate the inductance in nano-Henries.
3. Dot 3 indicates number of zeroes to be added.
0 = Black
1 = Brown
2 = Red
3 = Orange
4 = Yellow
5=Green
6=Blue
7 = Violet
8 = Gray
9 = White
D. General Information:
1. 1210C-xxx_: “1210C” = Size Type, “C” = Gold Plated pad, “xxx” = Inductance.
2. Tolerance “_”: K: ± 10%, J: ± 5%, G: ± 2%.
3. Product material: Ceramic.
4. Small and lightweight surface mounting type.
5. High Q at high frequency & High self-resonance frequency.
6. For 15ºC Temperature Rise at 25ºC ambient.
7. Inductance & Q measured with HP4291B Impedance Analyzer.
8. SRF measured using the HP8720D or HP8753E Network Analyzer.
9. DCR measured using the 16502 milliohm meter.
10. Operating temperature: -40°C to +125ºC.
11. This series has no color code due to the size is small.
12. Inductance and Current Range: From 10 nH (1000mA) to 4700 nH (260 mA)
13. SRF: From 90 MHz to 4100 MHz
14. For 15ºC Temperature Rise at 25ºC ambient
15. MSL: Level 1.
E. Applications:
1. Game Consoles
2. Set Top Boxes
3. Cables Modems
4. Computers
5. Mobile Communication Devices (Cell Phones, Radios, etc.)
6. RF Filters
F. Characteristics Curve:
Frontier Electronics Corp.®
http://www.frontierusa.com
Page 2 of 3
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989
Share Link: 