SDA9380-B21 View Datasheet(PDF) - Micronas
Part Name
Description
Manufacturer
SDA9380-B21 Datasheet PDF : 72 Pages
| |||
SDA 9380 - B21
Preliminary Data Sheet
DS1 Date
Page
Changes compared to previous issue
30.06.99
30
Equations of Horizontal and AFC EHT compensation changed
09.07.99 38, 39 Minimum ambient temperature at operating changed from -20 to 0 °C
09.07.99
21
Bit position 6 of PLL control byte 0 must be set to 0
19.07.99
55
diagrams of BSO modes added
16.08.99
20
PWM control: amplitude of V-parabola reduced
4 29.09.99
Document state 04 corresponds to silicon version B11
29.09.99
41
YUV input levels for HDTV added
29.09.99 23, 41 Low level Y0 input added
26.10.99
15.11.99
18.11.99
46
42
7, 38, 49,
52, 53
High level input voltage of I²C bus changed to 0.75*VDD(D)
Second value of VclampY in case of differential input deleted
HD output changed to open drain
19.11.99
50
Tolerances for black levels added (offset regulation)
19.11.99
39
Tolerances for supply voltages decreased
22.11.99 16, 26, 27 IIC bit YLL moved to reg. 22h, SW and RDCI moved to reg. 29h
22.11.99
23
IIC bits IN1NOM and IN2NOM added
06.12.99 1, 13, 15, Control item Extreme corner pin correction at subaddress 0Eh added,
16, 55, 56 item D/A moved to subaddress 30h
06.12.99
47
Input leakage current of all inputs specified
13.12.99
26
ABL: Time constants changed
17.12.99
26
ABL: Up time constants changed
21.01.00 4, 5, 52 Pin X1 and X2 exchanged
26.01.00
47
SCP output High level and blanking level changed
11.02.00
7
Last paragraph regarding soft start adapted
11.02.00
22
Warning 4 of previous edition deleted, warning 5 changed (now no. 4)
11.02.00
39
Any rise time of the supply voltages is allowed
10.03.00
49
Minimum value of maximum RGB output voltage changed
29.03.00
20
PWM control byte: specification of V-parabola amplitude changed
5 29.05.00
Document state 05 corresponds to silicon version B12
29.05.00
3
block delay moved between the blocks brightness and blue stretch
29.05.00
43
Min./Max. values of matrices removed
29.05.00
44
Min./Max. values of black level stretch changed
29.05.00
47
Output LOW and output HIGH value of D/A changed
29.05.00 1, 7, 13, 21 Specified H-frequency range of 15 to 19kHz added
05.07.00
52
Circuit at DCI input changed
05.07.00
34
Explanation of average beam current limit added
6 25.08.00
Document state 06 corresponds to silicon version B21
18.08.00
39
Positive-going of BSOIN upper threshold increased by 50mV
25.08.00
44
Brightness control range changed, nom. brightness removed
Micronas
iii
2001-01-29
Share Link: 