AFBR-5803TZ View Datasheet(PDF) - HP => Agilent Technologies

Part Name

Description

Manufacturer

AFBR-5803TZ

FDDI, 100 Mb/s ATM, and Fast Ethernet Transceivers in Low Cost 1 x 9 Package Style

HP => Agilent Technologies 

Regulatory Compliance Table

Feature

Test Method

Electrostatic Discharge (ESD) to MIL-STD-883C

the Electrical Pins

Method 3015.4

Electrostatic Discharge (ESD) to Variation of

the Duplex SC Receptacle

IEC 801-2

Electromagnetic Interference

(EMI)

Immunity

FCC Class B

CENELEC CEN55022

Class B (CISPR 22B)

VCCI Class 2

Variation of IEC 61000-4-3

Performance

Meets Class 1 (<1999 Volts)

Withstand up to 1500 V applied between electrical pins.

Typically withstand at least 25 kV without damage when the Duplex SC

Connector Receptacle is contacted by a Human Body Model probe.

Transceivers typically provide a 13 dB margin (with duplex SC receptacle) or a 9

dB margin (with duplex ST receptacles ) to the noted standard limits. However,

it should be noted that final margin depends on the customer's board and

chassis design.

Typically show no measurable effect from a 10 V/m field swept from 10 to 450

MHz applied to the transceiver when mounted to a circuit card without a

chassis enclosure.

Electromagnetic Interference (EMI)

Most equipment designs

utilizing these high speed

transceivers from Agilent will

be required to meet the

requirements of FCC in the

United States, CENELEC

EN55022 (CISPR 22) in Europe

and VCCI in Japan.

200

180 1.5

3.0

160 2.0

3.5

140 2.5

3.0

120

3.5

tr/f – TRANSMITTER

OUTPUT OPTICAL

RISE/FALL TIMES – ns

100

1200 1300 1320 1340 1360 1380

λC – TRANSMITTER OUTPUT OPTICAL

CENTER WAVELENGTH –nm

AFBR-5803Z FDDI TRANSMITTER TEST RESULTS

OF λC, ∆λ AND tr/f ARE CORRELATED AND

COMPLY WITH THE ALLOWED SPECTRAL WIDTH

AS A FUNCTION OF CENTER WAVELENGTH FOR

VARIOUS RISE AND FALL TIMES.

Figure 9. Transmitter Output Optical Spectral

Width (FWHM) vs. Transmitter Output Optical

Center Wavelength and Rise/Fall Times.

In all well-designed chassis,

two 0.5" holes for ST

connectors to protrude through

will provide 4.6 dB more

shielding than one 1.2" duplex

SC rectangular cutout. Thus, in

a well-designed chassis, the

duplex ST 1 x 9 transceiver

emissions will be identical to

the duplex SC 1 x 9

transceiver emissions.

Immunity

Equipment utilizing these

transceivers will be subject to

radio-frequency

electromagnetic fields in some

environments. These

transceivers have a high

immunity to such fields.

For additional information

regarding EMI, susceptibility,

ESD and conducted noise

testing procedures and results

on the

1 x 9 Transceiver family,

please refer to Applications

Note 1075, Testing and

Measuring Electromagnetic

Compatibility Performance of

the AFBR-510X/520X Fiber

Optic Transceivers.

Transceiver Reliability and

Performance Qualification Data

The 1 x 9 transceivers have

passed Agilent reliability and

performance qualification

testing and are undergoing

ongoing quality monitoring.

Details are available from your

Agilent sales representative.

Accessory Duplex SC Connectored

Cable Assemblies

Agilent recommends for

optimal coupling the use of

flexible-body duplex SC con-

nectored cable.

Accessory Duplex ST Connectored

Cable Assemblies

Agilent recommends the use of

Duplex Push-Pull connectored

cable for the most repeatable

optical power coupling

performance.

9

Share Link: