Technical Data Sheet
MITSUBISHI
PRELIMINARY
MITSUBISHI CMOS Image Sensor
M64285FP
15. Typical Characteristics
Measurement conditions are as follows unless otherwise noted.
VDD=5V, GAIN=0dB, CLK=2MHz, VREF=1.0V, Accum. Time=10ms, Room Temp.,
Light source is a uniform light from a 2856 ± 150 K halogen light valve without IR cut filter.
The characteristics shown in this section are example characteristics and not guaranteed.
[ Sensitivity Characteristics for 2D Image Data ]
10
1
0.1
0.01
0.1
2D Img (Eff) 100ms
2D Img (Eff) 10ms
2D Img (Eff) 1ms
2D Img (Eff) 0.1ms
2D Img (OB) 100ms
2D Img (OB) 10ms
2D Img (OB) 1ms
2D Img (OB) 0.1ms
(Eff) : Effective Pixels
(OB) : Optical Black Pixels
1
10
100
1000
Faceplate Illumination [ lx ]
10000
[ Sensitivity Characteristics for Projection Data ]
10
1
0.1
0.01
0.1
1
10
100
1000
Faceplate Illumination [ lx ]
10000
Col Prj (Eff) 100ms
Col Prj (Eff) 10ms
Col Prj (Eff) 1ms
Col Prj (Eff) 0.1ms
Col Prj (OB) 100ms
Col Prj (OB) 10ms
Col Prj (OB) 1ms
Col Prj (OB) 0.1ms
Row Prj (Eff) 100ms
Row Prj (Eff) 10ms
Row Prj (Eff) 1ms
Row Prj (Eff) 0.1ms
Row Prj (OB) 100ms
Row Prj (OB) 10ms
Row Prj (OB) 1ms
Row Prj (OB) 0.1ms
(Eff) : Effective Pixels
(OB) : Optical Black Pixels
* Too strong illumination makes the
output decrease, due to the noise
cancel circuit configuration.
( 18 / 26 )
Specifications and information herein are subject to change without notice.
02 / 05 / 01
Ver. 2.2E_01