STV0676 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
STV0676 Datasheet PDF : 21 Pages
| |||
STV0676
External interfaces
Benchmark testing of the STV0676 indicates that 30fps CIF video (compressed) can be
accommodated in 50% of USB bandwidth.
2.2 Mode selection
All USB devices report a VID, PID and power consumption as part of a standard device descriptor.
The VID and PID for STV0676 can be configured by the state of the digiport bits or by using an
external EEPROM. The mode selection is made using the two MODESEL pins as described in
Table 3 below.
Table 3: Mode selection
MODESEL[1]
0
1
0
1
MODESEL[0]
0
0
1
1
Mode of operation
USB Mode. External EEPROM fitted, therefore PID, VID and power
consumption read from this source. See Section 2.4
Slave I2C mode.
USB mode. Default. No external EEPROM fitted, the PID
VID and power consumption data determined by digiport[7:0].
See Section 2.3
Reserved
2.3 Selecting VID and PID via the digiport
Tables 4~7 demonstrate how the VID/PID information is defined via the digiport.
The current reference design for the STV0676-chipset has digiport[7:0] connected to VSS, thus the
VID and PID are 16’h0553 and 16’h0140 respectively.
The digiport also controls the device current consumption that is reported to the host at device
enumeration.
Table 4: Basic digiport configuration
digiport bit slice
[3:0]
[5:4]
[7:6]
function
configures the LS nibble of the PID
master VID/PID select
power setting
Table 5: Digiport LS nibble configuration
digiport[3:0]
4’b0000
4’b0001
4’b0010
4’b0011
4’b0100
4’b0101
PID LS nibble
4’b0000
4’b0001
4’b0010
4’b0011
4’b0100
4’b0101
9/21
Share Link: 