TX1000 View Datasheet(PDF) - C AND D TECHNOLOGIES
Part Name
Description
Manufacturer
TX1000 Datasheet PDF : 4 Pages
| |||
FEATURES
Remote Sense
Active Current Sharing
ORing Diode
OVP
Thermal Shutdown
DC OK Signal
Power Fail Warning Signal
Remote Inhibit
PRODUCT FEATURES
CHARACTERISTIC
500mV compensation
Single Wire; 5% tolerance if outputs are over 25% of rated load
Optional on all models (not available on 5V model)
125% of nominal (+7.5%)
Automatic Restart
Logic “1” when output is within +3% of nominal
Transition to Logic “0” at least 5msec before loss of output regulation
Logic “0” applied will inhibit output (referenced to –Sense terminal)
PRODUCT COMPLIANCES
APPROVAL
CHARACTERISTIC
UL and cUL
UL1950, 3rd Edition (1)
VDE
EN60950
FCC
Class A requirements for conducted emissions
CISPR 22
Class A requirements for conducted emissions
EN61000-3-2
Harmonic Currents, Class A
EN61000-4-2
Electrostatic Discharge, Level 4
EN61000-4-3
Radiated Immunity, Level 2
EN61000-4-4
Electrical Fast Transients, Level 3
EN61000-4-5
Input Surge Immunity, Level 3
Contact Factory for Replacement Model EN61000-4-6
EN61000-4-8
CE Mark
Conducted Immunity, Level 4
Magnetic Field Immunity, Level 2
Low Voltage Directive
Notes: (1) UL1950, 3rd Edition incorporates the requirements of CSA 1950.
ORDERING INFORMATION
MODEL DESIGNATION
BASE MODEL
TX1000
Chassis: “5” = 5” x 4.88” x 12”; “M” = modified
Output Voltage: See Chart below
Input Filter: “A” designates Class A EMI filter
Fan: “S” designates Standard Fan
Remote Inhibit: “L” designates that Logic “0” applied inhibits output
“P” designates Active Input Power Factor Correction with widerange input voltage of 90-264 VAC
Power Fail Warning: “L” designates transition to Logic “0” upon loss of AC
Output ORing diode: “N” = None; “D” = Diode Option
DC OK: “H” designates that Logic “1” indicates a DC OK condition
OUTPUT VOLTAGES
A = 5V
G = 36V
B = 12V
H = 48V
C = 15V
J = 20V
D = 18V
K = 3.3V
E = 24V
L = 2.5V
F = 28V
Product: www.cdpoweronline.com
TX1000 Rev D 1/2003
3
Share Link: 