LQH32DN1R0M53L View Datasheet(PDF) - Unspecified
Part Name
Description
Manufacturer
LQH32DN1R0M53L Datasheet PDF : 7 Pages
| |||
SpecNo.JELF243A-0118A-01
Reference Only
8.Environmental Performance (It shall be soldered on the substrate)
No.
Item
Specification
Test Method
8.1 Heat Resistance Appearance:No damage
Inductance Change: within ± 5%
DC Resistance Change:
within ± 5%
Temperature:105±2°C
Time: 1000h (+48h , -0h)
Then measured after exposure in the
room condition for 24±2 hours.
8.2 Cold Resistance
Temperature:-40±2°C
Time: 1000h (+48h , -0h)
Then measured after exposure in the
room condition for 24±2 hours.
8.3 Humidity
Temperature:85±2°C
Humidity:80~85%(RH)
Time: 1000h (+48h , -0h)
Then measured after exposure in the
room condition for 24±2 hours.
8.4 Temperature
Cycle
1 cycle:
1 step: -40±2°C / 30±3 minutes
2 step:Ordinary temp. / 5 minutes min
3 step:+105±2°C / 30±3 min
4 step: Ordinary temp. / 10 to 15 minutes min
Total of 100cycles
Then measured after exposure in the room
condition for 24±2 hours
P3/7
9.Specification of Packaging
9.1 Appearance and Dimensions of plastic tape
φ 1.5+-00.1
※Lead- in/out wire
0(0.2.2)
※The packing directions of the chip coil
in taping are unified with the in/out
positions of the lead wire.
Dimension of the Cavity is measured
at the bottom side.
2.9±0.2
4.0±0.1
4.0±0.1
2.0±0.05
1.7±0.2
Direction of feed
(in mm)
9.2 Specification of Taping
(1) Packing quantity (standard quantity)
2,000 pcs / reel
(2) Packing Method
Products shall be packed in the each embossed cavity of plastic tape and sealed by cover tape.
(3) Sprocket hole
The sprocket holes are to the right as the tape is pulled toward the user.
(4) Spliced point
Plastic tape and Cover tape has no spliced point.
(5) Missing components number
Missing components number within 0.1 % of the number per reel or 1 pc., whichever is greater,
and are not continuous. The specified quantity per reel is kept.
9.3 Pull Strength
Embossed carrier tape
Cover tape
10N min.
5N min.
9.4 Peeling off force of cover tape
Speed of Peeling off
300mm/min
165 to 180 degree
F
Cover tape
Peeling off force
0.2 to 0.7N
(minimum value is typical)
Plastic tape
MURATA MFG.CO., LTD
Share Link: 