SI8712BC-B-IS(2019) View Datasheet(PDF) - Silicon Laboratories

Part Name

Description

Manufacturer

SI8712BC-B-IS
(Rev.:2019)

5 KV LED EMULATOR INPUT, OPEN COLLECTOR OUTPUT ISOLATORS

Silicon Laboratories 

Si87xx

Table 3. Regulatory Information*

CSA

The Si87xx is certified under CSA Component Acceptance Notice 5A. For more details, see Master Contract

Number 232873.

60950-1: Up to 1000 VRMS reinforced insulation working voltage; up to 1000 VRMS basic insulation working

voltage.

60601-1: Up to 250 VRMS working voltage and 2 MOPP (Means of Patient Protection).

VDE

The Si87xx is certified according to VDE0884-10. For more details, see certificate 40037519.

VDE0884 Part 10: Up to 1414 Vpeak for reinforced insulation working voltage.

UL

The Si87xx is certified under UL1577 component recognition program. For more details, see File E257455.

Rated up to 5000 VRMS isolation voltage for basic protection.

CQC

The Si87xx is certified under GB4943.1-2011. For more details, see certificates CQC15001121489,

CQC15001121490, CQC15001121284, and CQC15001121315.

Rated up to 1000 VRMS reinforced insulation working voltage; up to 1000 VRMS basic insulation working voltage.

*Note: Regulatory Certifications apply to 3.75 kVRMS rated devices which are production tested to 4.5 kVRMS for 1 sec.

Regulatory Certifications apply to 5.0 kVRMS rated devices which are production tested to 6.0 kVRMS for 1 sec.

For more information, see "9.Ordering Guide" on page 22.

Table 4. Insulation and Safety-Related Specifications

Parameter

Value

Symbol Test Condition

Unit

SOIC-8

DIP8

SDIP6

Nominal External Air Gap

(Clearance)

Nominal External Tracking

(Creepage)

Minimum Internal Gap

(Internal Clearance)

Tracking Resistance

CLR

CPG

DTI

CTI or

PTI

IEC60112

4.7 min 7.2 min 9.6 min mm

3.9 min 7.0 min 8.3 min mm

0.016

0.016

0.016

mm

600

600

600

V

Erosion Depth

ED

0.031

0.031

0.057

mm

Resistance (Input-Output)*

RIO

1012

1012

1012



Capacitance (Input-Output)*

CIO

f = 1 MHz

1

1

1

pF

*Note: To determine resistance and capacitance, the Si87xx is converted into a 2-terminal device. Pins 1–4 (1–3, SDIP6) are

shorted together to form the first terminal, and pins 5–8 (4–6, SDIP6) are shorted together to form the second terminal.

The parameters are then measured between these two terminals.

8

Rev. 1.31

Share Link: