AA116-72LF(2010) View Datasheet(PDF) - Skyworks Solutions
Part Name
Description
Manufacturer
AA116-72LF Datasheet PDF : 10 Pages
| |||
DATA SHEET • AA116-72LF 1-BIT DIGITAL ATTENUATOR
Table 1. AA116-72LF Signal Descriptions
Pin #
Name
Description
1
J1
RF port. Must be DC blocked.
2
RF_GND
RF ground. Must be AC-coupled to ground.
3
J2
RF port. Must be DC blocked.
Pin #
Name
4
V1
5
V2
Description
DC control bias
DC control bias
Table 2. AA116-72LF Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Units
RF input power
PIN
1 W > 500 MHz 0/8 V
dBm
0.5 W @ 50 MHz 0/8 V
dBm
Supply voltage
VS
8
V
Control voltage
VCTL
–0.2
+8.0
V
Operating temperature
TOP
–40
+85
C
Storage temperature
TSTG
–65
+150
C
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Electrical and Mechanical Specifications
The absolute maximum ratings of the AA116-72LF are provided in
Table 2. Electrical specifications are provided in Table 3.
Typical performance characteristics of the AA116-72LF are
illustrated in Figures 3 through 6.
The state of the AA116-72LF is determined by the logic provided
in Table 4.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
October 5, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200209E
Share Link: 