25AA160C-E View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

25AA160C-E

16K SPI Bus Serial EEPROM

Microchip Technology 

25XX160C/D

1.0 ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings(†)

VCC.............................................................................................................................................................................6.5V

All inputs and outputs w.r.t. VSS .......................................................................................................... -0.6V to VCC+1.0V

Storage temperature .................................................................................................................................-65°C to 150°C

Ambient temperature under bias ...............................................................................................................-40°C to 125°C

ESD protection on all pins ..........................................................................................................................................4 kV

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for an

extended period of time may affect device reliability.

TABLE 1-1: DC CHARACTERISTICS

DC CHARACTERISTICS

Industrial (I):

TA = -40°C to +85°C

Automotive (E): TA = -40°C to +125°C

VCC = 1.8V to 5.5V

VCC = 1.8V to 5.5V

Param.

No.

Sym.

Characteristic

Min.

Max. Units

Test Conditions

D001 VIH1

High-level input

voltage

0.7 VCC

VCC+1

V—

D002 VIL1

D003 VIL2

Low-level input

voltage

-0.3

0.3 VCC

V VCC2.7V

-0.3

0.2 VCC

V VCC < 2.7V

D004

D005

VOL1

VOL2

Low-level output

voltage

—

0.4

—

0.2

D006 VOH

High-level output

VCC-0.5

—

voltage

V IOL = 2.1 mA

V IOL = 1.0 mA, VCC < 2.5V

V IOH = -400 A

D007 ILI

D008 ILO

Input leakage current

—

Output leakage

—

current

±1

A CS = VCC, VIN = VSS OR VCC

±1

A CS = VCC, VOUT = VSS OR VCC

D009 CINT

Internal Capacitance

—

(all inputs and

outputs)

D010 ICC Read

—

Operating Current

—

7

pF TA = 25°C, CLK = 1.0 MHz,

VCC = 5.0V (Note)

5

mA VCC = 5.5V; FCLK = 10.0 MHz;

SO = Open

2.5

mA VCC = 2.5V; FCLK = 5.0 MHz;

SO = Open

D011 ICC Write

—

5

mA VCC = 5.5V

—

3

mA VCC = 2.5V

D012 ICCS

—

5

A CS = VCC = 5.5V, Inputs tied to VCC or

Standby Current

VSS, +125°C

—

1

A CS = VCC = 5.5V, Inputs tied to VCC or

VSS, +85°C

Note: This parameter is periodically sampled and not 100% tested.

DS22150B-page 2

 2009-2013 Microchip Technology Inc.

Share Link: