XE1000 View Datasheet(PDF) - Xecom
Part Name
Description
Manufacturer
XE1000 Datasheet PDF : 8 Pages
| |||
XE1000 Electrical Specifications
Parameter
Min Typ Max Unit Description
Transmit Insertion Loss
Receive Insertion Loss
Line Matching Impedance
Total Harmonic Distortion
Ring Detect Sensitivity
Ring Indicate Output Voltage
Line Holding Current
Hook-Switch Control Voltage
On-Hook
Off-Hook
Hook-Switch Control Current
On-Hook
Off-Hook
1.0 2.0 4.0 dB
1.0 2.0 4.0 dB
420
ohms
72 76
dB
20
150 VRMS
4.2
Volts
10 20 120 Mamps
2.0 3.0
Volts
0.2 0.5 Volts
0
Mamps
5
Mamps
Loss between transmit signal input and
telephone line signal at 1000 hz with
600 ohm line termination.
Loss between telephone line input and
receive signal at 1000 hz with 600 ohm
line termination.
Input impedance on T1/T2 required to
match a 600 ohm telephone line. See
Application note beginning on page 5
to match a Complex impedance such
as UKA.
Level of signal distortion caused by the
XE1000 across the voice bandwidth.
Ring signal levels detected as a valid
ring. Limits may be altered by modem
configuration.
Signal level on RI when a valid ring sig-
nal is detected.
DC current supplied by the telephone
line.
Voltage required to set hook-switch.
Current required to drive hook-switch.
Line Short Control Voltage
Active
Inactive
0.2 0.8
4.0 4.5
Volts
Volts
Voltage Required to set Line Short relay
XECOM
(4)
XE1000
Share Link: 