PIC-2319SMB View Datasheet(PDF) - Unspecified

Part Name

Description

Manufacturer

PIC-2319SMB

Infrared Receiver Module

Unspecified 

Waitrony

Infrared Receiver Module

Module No.: PIC-2319SMB

Testing Method

Distance between emitter and

detector specifies maximum distance

that output waveform satisfies the

standard (FIG-3) under the conditions

below against the standard

transmitter.

a. Measuring place

Indoor without extreme reflection

of light.

b. Ambient light source

Detecting surface illumination is

200±5Lux under ordinary white

fluorescence lamp of no high

frequency lightning.

c. Standard transmitter

Transmitter wave indicated in

FIG-2 of standard transmitter is

arranged to satisfy Vo≥50mVp-p

under the measuring circuit

specified in FIG-3

Precautions for Use

a. Store and use where there is no force causing transformation or change in quality.

b. Store and use where there is no corrosive gas or sea (salt) breeze.

c. Store and use where there is no extreme humidity.

d. Solder the lead pin within the condition of ratings. After soldering, do not add exterior

force.

e. Do not wash this device. Wipe the stains of diode side with a soft cloth. You can use the

solvent, ethyl alcohol, or methyl alcohol only.

f. To prevent static electricity damage to the pre-amp, make sure that the human body, the

soldering iron are connected to ground before using.

Share Link: