Ordering
Oil burner control without plug-in base
refer to «Type summary»
Electrical connections
- Plug-in base AGK11...
- Cable holders AGK65..., AGK66, AGK67...
- Cable strain relief elements for AGK67...
refer to Data Sheet 7201
Electrical connections
- Plug-in base AGK13
- Plug-in housing AGK56
- Cover AGK68
refer to Data Sheet 7203
Flame detectors
- Photoresistive detectors QRB1...
- Blue-flame detectors QRC1...
refer to Data Sheet 7714
refer to Data Sheet 7716
Pedestal (empty housing)
- To increase the overall height of the LOA...to that of the LAI... / LAB...
AGK21
Remote reset module
- For use with the LOA26... / LOA36... printed circuit board versions
ARK21A27
Adapter
- For replacing LAB1... / LAI... by LOA...
- No rewiring of plug-in base required
KF8819
Demo case
- For showing the functioning of burner controls
- Refer to Operating Instructions B7989
KF8891
Test case, for making functional tests
- For testing burner controls
- Refer to Operating Instructions B7986
KF8843
Test adapter
- For testing burner controls
- With switch for manual startup of burner
- With switch for simulating the oil preheater’s release contact
- With 2 pairs of jacks for measuring the flame detector current
- Refer to Mounting Instructions C7981
KF8885
Test adapter
- For testing burner controls fitted to the burner
- With signal lamps for program indication
- With 2 jacks for measuring the flame detector current
KF8833
Test adapter
KF8840
- For testing burner controls fitted to the burner
- With signal lamps for program indication
- With switch for simulating the flame signal
- With holes for checking the control voltages at the tabs of the burner control
- With 2 jacks for measuring the flame detector’s resistance
4/10
Siemens Building Technologies
HVAC Products
CC1N7118en
09.10.2002