SBP
Features
• Thermal Transfer Printable
• Over lamination protects the printed area and ena-
bles a higher level of print durability
• Range of sizes and colors available (see page 4)
• Variety of label layouts and roll core diameters,
• Useable down to 2.0mm diameter, even on
Fluoropolymer wire jackets.
Temperature Rating
• Operating Temperature Range
-40 to 110°C (-40°F to 230°F)
• Minimum Application Temperature 10°C (50°F)
Specifications / Approvals
Industry
PGIS2 - file MH61871
Applications
• Ideal for wire and cable identification in general.
• Excellent conformability to round, irregular or flexible
surfaces including flat ribbon cables.
• Small diameter cables and wire (2.0mm / 0.08 inch
or greater) in wrap mode or flag mode.
• Industrial, Automotive, Rail, Aerospace and Defense,
Electrical
Design for Environment
• Does not contain any declarable or prohibited sub-
stances from the UNIFE Railway Industry Substances
List
• Further information and a downloadable declaration
covering RoHS and REACH compliance can be found
at the TE Product Compliance Support Centre:
http://www.te.com/usa-en/utilities/product-
compliance.html
Shelf Life
2 years when following good commercial storage practice detailed below.
Storage
Product should be stored in the original packaging, with any plastic covers which were included during shipping.
Store out of direct sunlight in a clean, dry, dust free, environment.
Product should be stored at approximately 22°C and 50% relative humidity.
INDUSTRIAL /// TTDS-211 – SBP TECHNICAL DATA SHEET
PAGE 2