SR2511F-0205-32K0A-S8-N-W-186 View Datasheet(PDF) - Unspecified

Part Name

Description

Manufacturer

SR2511F-0205-32K0A-S8-N-W-186

ROTARY SWITCH

Unspecified 

Specification

Rotary switch

SR25XX

DOC. No:

Date:

Author: 何建志

Approved: 王茂松

Rev. A

1. TEST CONDITIONS

Standard test conditions shall be 5-35℃ in temperature and 45-85% RH in humidity.

Should any doubt arise in judgment test shall be conducted at 20±2℃ and 65±5% RH.

2. OUTSIDE DIMENSION

Append drawing.

3. MECHANICAL PERFORMANCE

Item

Test Condition

Specification

3.1 Operating force

Operation temperature:-10℃ ~ +70℃

Storage temperature:-40℃ ~ +85℃

1.0±0.5kgf-cm

3.2 Control strength A static load of 1000gf-cm shall be

N/A

applied in the operating direction and

tensile direction of the unit for one

minute.

3.3 Terminal strength A static load of 1000gf-cm shall be

N/A

applied to the tip of the terminal in a

desired direction for one minute.

The number of tests shall be one per

terminal.

3.4 Control wobble

Shall be measured by applying a static

load of 100gf-cm to the tip of control

unit.

Less than 1 mm

3.5 Soldering

Temperature of solder 230±5℃

Duration of dipping 3±0.5 seconds

More than 90％ of the dipped

part shall be covered by solder

3.6 Soldering heat

resistance

Flow soldering condition:

to be performed in 3±0.5 seconds

within 230±5℃

Manual soldering condition:

to be performed in 3±0.5 seconds Max

within 300±5℃

Page 2 of 4

No abnormalities shall be

observed in appearance and

operation shall be assured.

Share Link: