TXM-418-LR View Datasheet(PDF) - Unspecified

Part Name

Description

Manufacturer

TXM-418-LR

LR Series Receiver Module

Unspecified 

LR Series Receiver Specifications Continued

Parameter

Symbol Min.

Typ. Max. Units Notes

Max. Time Between

Transitions

10.0

ms

5

Environmental

Operating Temperature

Range

–40

+70

ºC

5

1. The LR can utilize a 4.3 to 5.2VDC supply provided a 330Ω resistor is placed in series

with VCC.

2. Into a 50Ω load.

3. When operating from a 5V source, it is important to consider that the output will swing

to well less than 5 volts as a result of the required dropping resistor. Please verify that

the minimum voltage will meet the high threshold requirement of the device to which

data is being sent.

4. For BER of 10–5 at 1,200bps.

5. Characterized, but not tested.

6. Time to valid data output.

Figure 4: Electrical Specifications

Warning: This product incorporates numerous static-sensitive

components. Always wear an ESD wrist strap and observe proper ESD

handling procedures when working with this device. Failure to observe

this precaution may result in module damage or failure.

Typical Performance Graphs

Supply

RX Data

Figure 5: Turn-On Time from VCC

PDN

RX Data

Figure 6: Turn-On Time from PDN

–4–

–5–

Share Link: