T55B106M016C0100 View Datasheet(PDF) - Vishay Semiconductors

Part Name

Description

Manufacturer

T55B106M016C0100

vPolyTan™ Polymer Surface Mount Chip Capacitors, Molded Case, High Performance Type

Vishay Semiconductors 

www.vishay.com

Polymer Guide

Vishay

PACKING AND STORAGE

Polymer capacitors meet moisture sensitivity level rating (MSL) of 3 or 4 as specified in IPC/JEDEC® J-STD-020 and are dry

packaged in moisture barrier bags (MBB) per J-STD-033. Standard Ratings table defines MSL level for each particular family.

Level 3 specifies a floor life (out of bag) of 168 hours and level 4 specifies a floor life of 72 hours at 30 °C maximum and 60 %

relative humidity (RH). Unused capacitors should be re-sealed in the MBB with fresh desiccant. A moisture strip (humidity

indicator card) is included in the bag to assure dryness. To remove excess moisture, capacitors can be dried at 40 °C (standard

“dry box” conditions).

For detailed recommendations please refer to J-STD-033.

RECOMMENDED REFLOW PROFILES

Vishay recommends no more than 3 cycles of reflow in accordance with J-STD-020.

TP

Max. ramp up rate = 3 °C/s

tp

Max. ramp down rate = 6 °C/s

TL

TSmax.

Preheat area

tL

TSmin.

tS

25

Time 25 °C to peak

Time

PROFILE FEATURE

PREHEAT AND SOAK

Temperature min. (TSmin.)

Temperature max. (TSmax.)

Time (tS) from (TSmin. to TSmax.)

RAMP UP

Ramp-up rate (TL to Tp)

Liquidus temperature (TL)

Time (tL) maintained above TL

Peak package body temperature (Tp) max.

Time (tp) within 5 °C of the peak max. temperature

RAMP DOWN

Ramp-down rate (Tp to TL)

Time from 25 °C to peak temperature

SnPb EUTECTIC ASSEMBLY

LEAD (Pb)-FREE ASSEMBLY

100 °C

150 °C

60 s to 120 s

150 °C

200 °C

60 s to 120 s

3 °C/s maximum

183 °C

217 °C

60 s to 150 s

Depends on type and case - see table below

20 s

5s

6 min maximum

6 °C/s maximum

8 min maximum

PEAK PACKAGE BODY TEMPERATURE (Tp) MAXIMUM

TYPE

CASE CODE

PEAK PACKAGE BODY TEMPERATURE (TP) MAX.

SnPb EUTECTIC ASSEMBLY

LEAD (Pb)-FREE ASSEMBLY

T55

J, P, A, T, B, Z, V, D

260 °C

T52

E5, M1

n/a

260 °C

T58

MM, M0, W9, W0, A0, AA, B0, BB

260 °C

T59

EE

220 °C

250 °C

T54

EE

220 °C

250 °C

Notes

• T52, T55, and T58 capacitors are process sensitive.

PSL classification to JEDEC J-STD-075: R4G

• T54 and T59 capacitors with 100 % tin termination are process sensitive.

PSL classification to JEDEC J-STD-075: R6G

Revision: 31-Oct-2018

8

Document Number: 40076

For technical questions, contact: polytech@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: