DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

OP993 View Datasheet(PDF) - Optek Technology

Part Name
Description
Manufacturer
OP993
Optek
Optek Technology Optek
OP993 Datasheet PDF : 2 Pages
1 2
Product Bulletin OP993
June 1996
PIN Silicon Photodiode
Type OP993
Features
Wide receiving angle
Linear response vs. irradiance
Fast switching time
TO-18 equivalent package style
Description
The OP993 photodiode consists of a PIN
silicon photodiode mounted in a dark
blue plastic injection molded shell
package. The wide receiving angle
provides excellent on-axis coupling. The
sensors are 100% production tested for
close correlation with Optek emitters.
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Reverse Breakdown Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 V
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . -40o C to +100o C
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260o C(1)
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(2)
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering.
Max. 20 grams force may be applied to leads when soldering.
(2) Derate linearly 1.67 mW/o C above 25o C.
(3) Light source is an unfiltered GaAlAs emitting diode operating at peak emission wavelength of
890nm and Ee(APT) of 1.7 mW/cm2 average within a .250" dia. aperture.
(4) This dimension is held to within ± 0.005" on the flange edge and may vary up to ± 0.020" in
the area of the leads.
Typical Performance Curves
Optek’s packaging process provides
excellent optical and mechanical axis
alignment. The shell also provides
excellent optical lens surface, control of
chip placement, and consistency of
external package dimensions.
Relative Response vs.
Wavelength
Coupling Characteristics
OP993 and OP293
VR = 5 V
IF = 20 mA
λ- Wavelength - nm
Distance Between Lens tips - inches
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
3-64
(972) 323-2200
Fax (972) 323-2396

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]