T89C51RB2 View Datasheet(PDF) - Atmel Corporation

Part Name

Description

Manufacturer

T89C51RB2

8-bit Microcontroller with 16 Kbytes/ 32 Kbytes FLASH

Atmel Corporation 

T89C51RB2/RC2

8-bit Microcontroller with 16 Kbytes/ 32 Kbytes FLASH

1. Description

T89C51RB2/RC2 is a high performance FLASH version

of the 80C51 8-bit microcontrollers. It contains a 16K

or 32Kbytes Flash memory block for program and data.

The 16 Kbytes or 32 Kbytes FLASH memory can be

programmed either in parallel mode or in serial mode

with the ISP capability or with software. The

programming voltage is internally generated from the

standard VCC pin.

The T89C51RB2/RC2 retains all features of the 80C52

with 256 bytes of internal RAM, a 7-source 4-level

interrupt controller and three timer/counters.

In addition, the T89C51RB2/RC2 has a Programmable

Counter Array, an XRAM of 1024 byte, a Hardware

Watchdog Timer, a Keyboard Interface, a SPI Interface,

a more versatile serial channel that facilitates

multiprocessor communication (EUART) and a speed

improvement mechanism (X2 mode).

Pinout is the standard 40/44 pins of the C52.

The fully static design of the T89C51RB2/RC2 allows

to reduce system power consumption by bringing the

clock frequency down to any value, even DC, without

loss of data.

The T89C51RB2/RC2 has 2 software-selectable modes

of reduced activity and 8 bit clock prescaler for further

reduction in power consumption. In the Idle mode the

CPU is frozen while the peripherals and the interrupt

system are still operating. In the power-down mode the

RAM is saved and all other functions are inoperative.

The added features of the T89C51RB2/RC2 make it more

powerful for applications that need pulse width

modulation, high speed I/O and counting capabilities

such as alarms, motor control, corded phones, smart card

readers.

2. Features

• 80C52 Compatible

• 8051 pin and instruction compatible

• Four 8-bit I/O ports

• Three 16-bit timer/counters

• 256 bytes scratch pad RAM

• 10 Interrupt sources with 4 priority levels

• Dual Data Pointer

• Variable length MOVX for slow RAM/peripherals

• ISP (In System Programming) using standard VCC

power supply.

• Boot ROM contains low level FLASH programming

routines and a default serial loader

• High-Speed Architecture

• 40 MHz in standard mode

• 20 MHz in X2 mode (6 clocks/machine cycle)

• 16K/32K bytes on-chip FLASH program / data

Memory

• Byte and page (128 bytes) erase and write

• 100k write cycles

• On-chip 1024 bytes expanded RAM (XRAM)

• Software selectable size (0, 256, 512, 768, 1024

bytes)

• 256 bytes selected at reset for TS87C51RB2/RC2

compatibility

• Keyboard interrupt interface on port P1

• SPI Interface (Master / Slave Mode)

• 8-bit clock prescaler

• Improved X2 mode with independant selection for

CPU and each peripheral

• Programmable Counter Array 5 Channels with:

• High Speed Output,

• Compare / Capture,

• Pulse Width Modulator,

• Watchdog Timer Capabilities

• Asynchronous port reset

• Full duplex Enhanced UART

• Dedicated Baud Rate Generator for UART

• Low EMI (inhibit ALE)

Rev. B - 30-Mar-01

1

Preliminary

Share Link: