CPF107J View Datasheet(PDF) - YCL Electronics

Part Name

Description

Manufacturer

CPF107J

Asymmetric Digital Subscriber Line, POTS Splitter For ADSL CPE side

YCL Electronics  

Product Specification

CPF107J

4.6.3. Attenuation Distortion in the Voice band :

The variation of insertion loss with frequency shall be measured using the test set up in

Fig.1 The defined ZHP-r will be attached to the xDSL port of the Splitter.(if the Splitter is

an internal part of the ATU, then the modem remains attached as the xDSL load).The

increase in Attenuation Distortion, relative to the 1000 Hz insertion loss caused by the

POTS Splitter. Including the ZHP-r ( or modem ) load attached, using each of the test

loops identified above shall be within Electrical Specification table.

5. Environmental condition:

5.1. Resistibility to overvoltages and overcurrents:

The splitter has to comply with requirements as per ITU-T K.21.

5.2. Climatic conditions:

5.2.1. Operating temperature:

Application

indoor

Long time operation guarantee temperature ( 5 to 40 0C )

Short time operation guarantee temperature ( 0 to 50 0C )

( According to ETS 300 019, class 3.2 )

5.2.2. Storage and transport:

Low ambient temperature

- 20 0C

High ambient temperature

+85 0C

( According to MIL-STD-202 method 107 )

5.2.3. Operation humidity:

Long time operation guarantee humidity ( 5 to 85 % )

Short time operation guarantee humidity ( 5 to 90 % )

Short time : within 72 continuous hours and 15 days in a year

6. Reliability conditions:

6.1. Thermal shock :

Temperature from -20 °C to +85 °C for 5 cycles

(According to MIL-STD-202 , method 107)

6.2. Temperature humidity exposure :

+50 °C /95RH , 96hrs

(According to MIL-STD-202 , method 103)

6.3. Vibration test :

Random vibration , frequency 5-500Hz , sweep time :1 hr / axis /

Force : 2.4grams (According to MIL-STD-202 , method 204)

Data sheet subject to change without notice

RDPS-POTS415(R1)09/19/2002

SHEET 9 OF 10

Share Link: