RL1206GK-070R105H View Datasheet(PDF) - YAGEO Corporation

Part Name

Description

Manufacturer

RL1206GK-070R105H

Chip Resistor Surface Mount LOW OHMIC CHIP RESISTORS

YAGEO Corporation 

Chip Resistor Surface Mount RL SERIES 0402 to 2512

Product specification 4

9

MARKING

RL0805 / RL1206 / RL1210 /RL1218 / RL2010 / RL2512

Fig. 1

020

YNSC005

Value = 20 mΩ

E-24 series / Non-series (R= 25/40/50/60/250/400/500 mΩ): 4 digits

The “R” is used as a decimal point; the other 3 digits are significant.

RL0603: R≥100 mX IN E-24 SERIES, R = 10/20/30/40/50/60 mΩ

YNSC006

Fig. 2 Value = 22 mΩ

3 digits

The “R” is used as a decimal point; the other 2 digits are significant.

RL0402 / RL0603: R<100 mX EXCEPT 10/20/30/40/50/60 mΩ

Fig. 3

No marking

ynsc007

For further marking information, please see special data sheet “Chip resistors marking”.

CONSTRUCTION

The resistors are constructed out of a high-grade ceramic

body. Internal metal electrodes are added at each end and

connected by a resistive paste. The composition of the

paste is adjusted to give the approximate required

resistance and laser cutting of this resistive layer that

achieves tolerance trims the value. The resistive layer is

covered with a protective coat and printed with the

resistance value. Finally, the two external terminations

(matte tin) are added. See fig. 4.

DIMENSIONS

Table 1 For outlines see fig. 4

TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm)

RL0402 1.00 ±0.10 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10

RL0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15

RL0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20

RL1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20

RL1210 3.10 ±0.10 2.60 ±0.15 0.55 ±0.10 0.50 ±0.20 0.50 ±0.20

RL1218 3.05 ±0.15 4.60 ±0.20 0.55 ±0.10 0.45 ±0.25 0.50 ±0.25

RL2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20

RL2512 6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20

OUTLINES

For dimension see Table 1

H

I2

I1

W

L

Fig. 4 Chip resistor outlines

marking layer

protective coat

resistive layer

inner electrode

termination (Ni / matte tin)

ceramic substrate

YNSC064

Mar 22, 2010 V.5

www.yageo.com

Share Link: