W78E354
Flash Operation D.C. Characteristics, continued
PARAMETER
SYM.
Input High Voltage
VIH
A0−A14, D0−D7, A9CTRL,
A13CTRL, A14CTRL, OECTRL,
OE , CE
Output Low Voltage
VOL
D0−D7
Output High Voltage
VOH
D0−D7
VPP Erase Voltage
VEP
VPP Program Voltage
VCP
SPECIFICATION
MIN. TYP. MAX.
2.4
-
VDD
+0.2
-
- 0.45
2.4
-
-
14.25 14.5 14.75
12.25 12.5 12.75
UNIT
V
V
V
V
V
TEST CONDITIONS
VDD = 5.5V
VDD = 4.5V
IOL = +2 mA
VDD = 4.5V
IOH = -100 µA
TYPICAL APPLICATION
Please note:
While the chip is being powered on and the RESET pin is low, if P1.5 and P3.2 are kept low at the
same time, then the POR (Power-on Reset) will last until P1.5 or P3.2 is pulled High, whichever
occurs first.
Headquarters
Winbond Electronics (H.K.) Ltd. Winbond Electronics North America Corp.
No. 4, Creation Rd. III,
Rm. 803, World Trade Square, Tower II, Winbond Memory Lab.
Science-Based Industrial Park,
123 Hoi Bun Rd., Kwun Tong,
Hsinchu, Taiwan
Kowloon, Hong Kong
TEL: 886-3-5770066
TEL: 852-27513100
FAX: 886-3-5792697
FAX: 852-27552064
http://www.winbond.com.tw/
Voice & Fax-on-demand: 886-2-27197006
Taipei Office
Winbond Microelectronics Corp.
Winbond Systems Lab.
2727 N. First Street, San Jose,
CA 95134, U.S.A.
TEL: 408-9436666
FAX: 408-5441798
11F, No. 115, Sec. 3, Min-Sheng East Rd.,
Taipei, Taiwan
TEL: 886-2-27190505
FAX: 886-2-27197502
Note: All data and specifications are subject to change without notice.
- 45 -
Publication Release Date: April 1997
Revision A1