Continued from preceding page.
Pin No.
Pin
LB1821M
Functions
19
IN1+
Hall inputs
20
IN1–
High is defined as IN+ > IN–, and low as the opposite.
21
IN2+
An amplitude of 100 mV p-p (differential) or more is
22
IN2–
desirable in the Hall signals. Connect capacitors between
23
IN3+
the IN+ and IN– pins if noise on the Hall signals causes
24
IN3–
problems.
Equivalent circuit
Output current detection
Connect a resistor between this pin and ground.
25
RF
The output limitation maximum current, IOUT, is set to be
0.52/Rf by this resistor.
26
28
30
UL
VL
WL
This IC implements duty control using output signal PWM.
These are open collector sink outputs.
27
UH
29
VH
Outputs (Fixed current source outputs)
31
WH
Power-supply voltage
32
VCC
Connect a capacitor between this pin and ground for power
supply stabilization.
Continued on next page.
No. 5686-14/16