DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MC13191 View Datasheet(PDF) - Freescale Semiconductor

Part Name
Description
Manufacturer
MC13191
Freescale
Freescale Semiconductor Freescale
MC13191 Datasheet PDF : 24 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
6.2.2 SPI Transaction Operation
Although the SPI port of an MCU transfers data in bursts of 8 bits, the MC13191 requires that a complete
SPI transaction be framed by CE, and there will be three (3) or more bursts per transaction. The assertion
of CE to low, signals the start of a transaction. The first SPI burst is a write of an 8-bit header to the
transceiver (MOSI is valid) that defines a 6-bit address of the internal resource being accessed and
identifies the access as being a read or write operation. In this context, a write consists of data written to
the MC13191 and a read consists of data written to the SPI master. The following SPI bursts will be either
the write data (MOSI is valid) to the transceiver or read data from the transceiver (MISO is valid).
Although the SPI bus is capable of sending data simultaneously between master and slave, the MC13191
never uses this mode. The number of data bytes (payload) will be a minimum of 2 bytes and can extend to
a larger number depending on the type of access. After the final SPI burst, CE is negated to high to signal
the end of the transaction. Refer to the MC13191 Reference Manual, (MC13191RM) for more details on
SPI registers and transaction types.
An example SPI read transaction with a 2-byte payload is shown in Figure 8.
CE
Clock Burst
SPICLK
MISO
Valid
Valid
MOSI
Valid
Header
Read data
Figure 8. SPI Read Transaction Diagram
7 Pin Connections
Table 8. Pin Function Description
Pin # Pin Name
Type
Description
1 RFIN-
RF Input
LNA negative differential input.
2 RFIN+ RF Input
LNA positive differential input.
3 Not Used
Tie to Ground.
4 Not Used
Tie to Ground.
5 PAO+
6 PAO-
7 SM
RF Output /DC
Input
Power Amplifier Positive Output. Open drain. Connect to
VDDA.
RF Output/DC Input Power Amplifier Negative Output. Open drain. Connect to
VDDA.
Test mode pin. Tie to Ground
Functionality
Tie to Ground for
normal operation
MC13191 Technical Data, Rev. 1.6
12
Freescale Semiconductor

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]