MC13191 View Datasheet(PDF) - Freescale Semiconductor
Part Name
Description
Manufacturer
MC13191 Datasheet PDF : 24 Pages
| |||
5.4 AC Electrical Characteristics
NOTE
All AC parameters measured with SPI Registers at default settings except
where noted and the following registers over-programmed:
Register 08 = 0xFFF7 and Register 11 = 0x20FF
Table 4. Receiver AC Electrical Characteristics
(VBATT, VDDINT = 2.7 V, TA = 25 °C, fref = 16 MHz, unless otherwise noted.
Parameters measured at connector J6 of evaluation circuit.)
Characteristic
Symbol
Min
Typ
Max
Sensitivity for 1% Packet Error Rate (PER) (-40 to +85 °C)
SENSper
-
Sensitivity for 1% Packet Error Rate (PER) (+25 °C)
-
Saturation (maximum input level)
Channel Rejection for 1% PER (desired signal -82 dBm)
+5 MHz (adjacent channel)
-5 MHz (adjacent channel)
+10 MHz (alternate channel)
-10 MHz (alternate channel)
>= 15 MHz
SENSmax
0
-
-
-
-
-
Frequency Error Tolerance (total)
-
Symbol Rate Error Tolerance
-
-92
-
-92
-82
10
-
25
-
31
-
42
-
41
-
49
-
-
200
-
80
Table 5. Transmitter AC Electrical Characteristics
(VBATT, VDDINT = 2.7 V, TA = 25 °C, fref = 16 MHz, unless otherwise noted.
Parameters measured at connector J5 of evaluation circuit.)
Characteristic
Symbol
Min
Typ
Max
Power Spectral Density (-40 to +85 °C) Absolute limit
-
-47
-
Power Spectral Density (-40 to +85 °C) Relative limit
Nominal Output Power1
Maximum Output Power2
-
47
-
Pout
-5
0
-
4
Error Vector Magnitude
EVM
-
20
45
Output Power Control Range (-27 dBm to +4 dBm typical)
-
31
-
Over the Air Data Rate
-
250
-
Spurious Emissions
-
-56
-40
2nd Harmonic
-
-42
-
3rd Harmonic
-
-44
-
1 SPI Register 12 programmed to 0x00BC which sets output power to nominal (0 dBm typical).
2 SPI Register 12 programmed to 0x00FF which sets output power to maximum.
Unit
dBm
dBm
dBm
dB
dB
dB
dB
dB
kHz
ppm
Unit
dBm
dBm
dBm
%
dB
kbps
dBm
dBc
dBc
MC13191 Technical Data, Rev. 1.6
8
Freescale Semiconductor
Share Link: 