Table 5. Electrical Characteristics (TA = 25°C unless otherwise noted) (continued)
Characteristic
Symbol
Min
Typ
Max
Unit
Typical Performance — 900 MHz (In Freescale 900 MHz Application Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ1 = 106 mA, IDQ2 =
285 mA, 920--960 MHz Bandwidth
VDD = 28 Vdc, IDQ1 = 40 mA, IDQ2 = 340 mA
Pout @ 1 dB Compression Point, CW
P1dB
—
31
—
W
IMD Symmetry @ 25 W PEP, Pout where IMD Third Order
Intermodulation 30 dBc
IMDsym
MHz
—
45
—
(Delta IMD Third Order Intermodulation between Upper and Lower
Sidebands > 2 dB)
VBW Resonance Point
(IMD Third Order Intermodulation Inflection Point)
Quiescent Current Accuracy over Temperature (1)
with 3 kΩ Gate Feed Resistors (--30 to 85°C)
VBWres
—
80
—
MHz
∆IQT
—
0.02
—
%
Gain Flatness in 40 MHz Bandwidth @ Pout = 3.2 W Avg.
Gain Variation over Temperature
(--30°C to +85°C)
GF
—
0.2
—
dB
∆G
—
0.036
—
dB/°C
Output Power Variation over Temperature
(--30°C to +85°C)
∆P1dB
—
0.01
—
dBm/°C
Typical W--CDMA Broadband Performance — 700 MHz (In Freescale 700 MHz Application Test Fixture, 50 ohm system) VDD = 28 Vdc,
IDQ1 = 106 mA, IDQ2 = 285 mA, Pout = 3.2 W Avg., Single--Carrier W--CDMA, IQ Magnitude Clipping, Input Signal PAR = 7.5 dB @ 0.01%
Probability on CCDF. ACPR measured in 3.84 MHz Channel Bandwidth @ ±5 MHz Offset.
Frequency
728 MHz
Gps (dB)
36.4
PAE (%)
16.1
ACPR (dBc)
--47.7
IRL (dB)
--17.9
748 MHz
36.4
16.1
--47.8
--20.7
768 MHz
36.4
16.0
--47.9
--21.8
1. Refer to AN1977, Quiescent Current Thermal Tracking Circuit in the RF Integrated Circuit Family and to AN1987, Quiescent Current Control
for the RF Integrated Circuit Device Family. Go to http://www.freescale.com/rf. Select Documentation/Application Notes -- AN1977 or
AN1987.
MW7IC930NR1 MW7IC930GNR1 MW7IC930NBR1
4
RF Device Data
Freescale Semiconductor