P4KE10 View Datasheet(PDF) - Daesan Electronics Corp.

Part Name

Description

Manufacturer

P4KE10

POWER 400Watts VOLTAGE 6.8 to 440 Volts

Daesan Electronics Corp. 

P4KE6.8 THRU P4KE440CA

POWER 400Watts

VOLTAGE 6.8 to 440 Volts

Features

· Plastic package has Underwriters Laboratory Flammability

Classification 94V-0

· Glass passivated junction

· 400W peak pulse power capability with a 10/100μS

waveform, reptition rate(duty cycle) : 0.01%

· Excellent clamping capability

· Low incremental surge resistance

· Fast response time : typically less than 1.0ps from 1 Volts to

V(BR) for uni-directional and 5.0ns for Bi-directional types

· Devices with V(BR) > 10V, ID are typically less than 1.0μA

· High temperature soldering guaranteed : 265℃/10seconds,

0.375"(9.5mm) lead length, 5lbs. (2.3kg) tension

Mechanical Data

· Case : DO-41 molded plastic body over passivated junction

· Terminals : Solder plated axial leads, solderable per

MIL-STD-750, method 2026

· Polarity : For uni-directional types the color band denotes

cathode end. which is positive with respect to the

anode under normal TVS operation

· Mounting Position : Any

· Weight : 0.012 ounce, 0.34 gram

DO-41

0.107(2.7)

0.080(2.0)

DIA.

1.0(25.4)

MIN.

0.205(5.2)

0.166(4.2)

0.034(0.9)

0.028(0.7)

DIA.

1.0(25.4)

MIN.

Dimensions in inches and (millimeters)

Devices For Bidirectional Applications

· For bi-directional use C or CA suffix for types P4KE7.5 thru types P4KE440CA(e.g. P4KE10C, P4KE220CA),

electrical characteristics apply in both directions.

Maximum Ratings And Electrical Characteristics

(Ratings at 25℃ ambient temperature unless otherwise specified)

Symbols

Values

Peak power dissipation with a 10/100μS waveform (Note 1. Fig. 3)

Peak pulse current with a 10/100μS waveform (Note 1)

Steady state power dissipation at TL=75℃ lead length 0.375"(9.5mm) (Note2)

Peak forward surge current, 8.3mm single half sine-wave superimposed on

rated load(JEDEC method) (Note 3)

Maximum instantaneous forward voltage at 25A for unidirectional only(Note4)

Operating junction and storage temperature range

PPPM

IPPM

PM(AV)

IFSM

VF

TJ,TSTG

Min.400

See Table 1

1.0

40.0

3.5/50

-55 to +175

Notes:

(1) Non repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2

(2) Mounted on copper pads area of 1.6×1.6"(40×40mm) per Fig.5

(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulse per minute maximum

(4) VF=3.5 Volts max. for devices of V(BR)≤220V, and VF=5.0 Volts max. for devices of V(BR)>220V

Units

Watts

Amps

Watts

Amps

Volts

℃

Share Link: