MPC8541CPXAJD(2006) View Datasheet(PDF) - Freescale Semiconductor

Part Name

Description

Manufacturer

MPC8541CPXAJD
(Rev.:2006)

PowerQUICC™ III Integrated Communications Processor Hardware Specifications

Freescale Semiconductor 

Electrical Characteristics

2.1.2 Power Sequencing

The MPC8541Erequires its power rails to be applied in a specific sequence in order to ensure proper device

operation. These requirements are as follows for power up:

1. VDD, AVDDn

2. GVDD, LVDD, OVDD (I/O supplies)

Items on the same line have no ordering requirement with respect to one another. Items on separate lines

must be ordered sequentially such that voltage rails on a previous step must reach 90 percent of their value

before the voltage rails on the current step reach ten percent of theirs.

NOTE

If the items on line 2 must precede items on line 1, please ensure that the

delay will not exceed 500 ms and the power sequence is not done greater

than once per day in production environment.

NOTE

From a system standpoint, if the I/O power supplies ramp prior to the VDD

core supply, the I/Os on the MPC8541E may drive a logic one or zero during

power-up.

2.1.3 Recommended Operating Conditions

Table 2 provides the recommended operating conditions for the MPC8541E. Note that the values in

Table 2 are the recommended and tested operating conditions. Proper device operation outside of these

conditions is not guaranteed.

Table 2. Recommended Operating Conditions

Characteristic

Symbol

Recommended Value

Unit

Core supply voltage

VDD

1.2 V ± 60 mV

V

1.3 V± 50 mV (for 1 GHz only)

PLL supply voltage

AVDD

1.2 V ± 60 mV

V

1.3 V ± 50 mV (for 1 GHz only)

DDR DRAM I/O voltage

Three-speed Ethernet I/O voltage

GVDD

2.5 V ± 125 mV

V

LVDD

3.3 V ± 165 mV

V

2.5 V ± 125 mV

PCI, local bus, DUART, system control and power management, OVDD

3.3 V ± 165 mV

V

I2C, and JTAG I/O voltage

MPC8541E PowerQUICC™ III Integrated Communications Processor Hardware Specifications, Rev. 4

Freescale Semiconductor

9

Share Link: