MPC8541EPXAJF View Datasheet(PDF) - Freescale Semiconductor

Part Name

Description

Manufacturer

MPC8541EPXAJF

PowerQUICC™ III Integrated Communications Processor Hardware Specification

Freescale Semiconductor 

Electrical Characteristics

Figure 2 shows the undershoot and overshoot voltages at the interfaces of the MPC8541E.

G/L/OVDD + 20%

G/L/OVDD + 5%

VIH

G/L/OVDD

GND

GND – 0.3 V

VIL

GND – 0.7 V

Not to Exceed 10%

Note:

of tSYS1

1. Note that tSYS refers to the clock period associated with the SYSCLK signal.

Figure 2. Overshoot/Undershoot Voltage for GVDD/OVDD/LVDD

The MPC8541E core voltage must always be provided at nominal 1.2 V (see Table 2 for actual

recommended core voltage). Voltage to the processor interface I/Os are provided through separate sets of

supply pins and must be provided at the voltages shown in Table 2. The input voltage threshold scales with

respect to the associated I/O supply voltage. OVDD and LVDD based receivers are simple CMOS I/O

circuits and satisfy appropriate LVCMOS type specifications. The DDR SDRAM interface uses a

single-ended differential receiver referenced the externally supplied MVREF signal (nominally set to

GVDD/2) as is appropriate for the SSTL2 electrical signaling standard.

MPC8541E PowerQUICC™ III Integrated Communications Processor Hardware Specification, Rev. 4.2

10

Freescale Semiconductor

Share Link: