PIC18F65J50T-I/PT View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC18F65J50T-I/PT

64/80-Pin High-Performance, 1-Mbit Flash USB Microcontrollers with nanoWatt Technology

Microchip Technology 

PIC18F87J50 FAMILY

1.0 DEVICE OVERVIEW

This document contains device-specific information for

the following devices:

• PIC18F65J50

• PIC18F66J50

• PIC18F66J55

• PIC18F67J50

• PIC18F85J50

• PIC18F86J50

• PIC18F86J55

• PIC18F87J50

This family introduces a new line of low-voltage USB

microcontrollers with the main traditional advantage of

all PIC18 microcontrollers – namely, high computa-

tional performance and a rich feature set – at an

extremely competitive price point. These features

make the PIC18F87J50 family a logical choice for

many high-performance applications, where cost is a

primary consideration.

1.1 Core Features

1.1.1 nanoWatt TECHNOLOGY

All of the devices in the PIC18F87J50 family incorporate

a range of features that can significantly reduce power

consumption during operation. Key items include:

• Alternate Run Modes: By clocking the controller

from the Timer1 source or the internal RC oscilla-

tor, power consumption during code execution

can be reduced by as much as 90%.

• Multiple Idle Modes: The controller can also run

with its CPU core disabled but the peripherals still

active. In these states, power consumption can be

reduced even further, to as little as 4% of normal

operation requirements.

• On-the-Fly Mode Switching: The

power-managed modes are invoked by user code

during operation, allowing the user to incorporate

power-saving ideas into their application’s

software design.

1.1.2 UNIVERSAL SERIAL BUS (USB)

Devices in the PIC18F87J50 family incorporate a

fully-featured Universal Serial Bus communications

module with a built-in transceiver that is compliant with

the USB Specification Revision 2.0. The module

supports both low-speed and full-speed communication

for all supported data transfer types.

1.1.3

OSCILLATOR OPTIONS AND

FEATURES

All of the devices in the PIC18F87J50 family offer five

different oscillator options, allowing users a range of

choices in developing application hardware. These

include:

• Two Crystal modes, using crystals or ceramic

resonators.

• Two External Clock modes, offering the option of

a divide-by-4 clock output.

• An internal oscillator block which provides an

8 MHz clock and an INTRC source (approxi-

mately 31 kHz, stable over temperature and VDD),

as well as a range of 6 user-selectable clock

frequencies, between 125 kHz to 4 MHz, for a

total of 8 clock frequencies. This option frees an

oscillator pin for use as an additional general

purpose I/O.

• A Phase Lock Loop (PLL) frequency multiplier,

available to the high-speed crystal, external

oscillator and internal oscillator, providing a clock

speed up to 48 MHz.

• Dual clock operation, allowing the USB module to

run from a high-frequency oscillator while the rest

of the microcontroller is clocked at a different

frequency.

The internal oscillator block provides a stable reference

source that gives the family additional features for

robust operation:

• Fail-Safe Clock Monitor: This option constantly

monitors the main clock source against a reference

signal provided by the internal oscillator. If a clock

failure occurs, the controller is switched to the

internal oscillator, allowing for continued low-speed

operation or a safe application shutdown.

• Two-Speed Start-up: This option allows the

internal oscillator to serve as the clock source

from Power-on Reset, or wake-up from Sleep

mode, until the primary clock source is available.

1.1.4 EXPANDED MEMORY

The PIC18F87J50 family provides ample room for

application code, from 32 Kbytes to 128 Kbytes of code

space. The Flash cells for program memory are rated

to last in excess of 10000 erase/write cycles. Data

retention without refresh is conservatively estimated to

be greater than 20 years.

The Flash program memory is readable and writable

during normal operation. The PIC18F87J50 family also

provides plenty of room for dynamic application data

with up to 3904 bytes of data RAM.

© 2007 Microchip Technology Inc.

Preliminary

DS39775B-page 7

Share Link: