ATS632LSA View Datasheet(PDF) - Allegro MicroSystems

Part Name

Description

Manufacturer

ATS632LSA

ZERO-SPEED, SELF-CALIBRATING, NON-ORIENTED, HALL-EFFECT GEAR-TOOTH SENSOR

Allegro MicroSystems 

ATS632LSA

HALL-EFFECT

GEAR-TOOTH SENSOR

SUBASSEMBLY

MECHANICAL INFORMATION

Component

Material

Function

Units

Sensor Face

Thermoset epoxy

Maximum temperature

170°C*

Plastic Housing

Polyamide, 33% glass filled

(Nylon 6, 6)

264 psi deflection temp. (DTUL)

Approximate melting temperature

225°C

260°C

Leads

Copper

–

–

Lead Pull

–

–

8N

Lead Finish

90/10 tin/lead solder plate –

†

Flame Class Rating

–

–

UL94V-0

*Temperature excursions to 225 °C for 2 minutes or less are permitted.

†All industry-accepted soldering techniques are permitted for these subassemblies provided the indicated

maximum temperature for each component (e.g., sensor face, plastic housing) is not exceeded. Reasonable

dwell times, which do not cause melting of the plastic housing, should be used.

Sensor Location (in millimeters)

(sensor location relative to package center is the design

objective)

0.1

A

Dwg. MH-018-2 mm

Lead Cross-Section (in millimeters)

0.41

0.38

0.0076

MIN. PLATING

THICKNESS

Dwg. MH-019 mm

continued next page…

Share Link: