LA73054 View Datasheet(PDF) - SANYO -> Panasonic
Part Name
Description
Manufacturer
LA73054 Datasheet PDF : 12 Pages
| |||
Package Dimensions
unit : mm
3247A
36
19
LA73054
1
0.3
15.0
18
0.2
(0.7)
0.8
SANYO : SSOP36(275mil)
Control Pin Function Table
Pin No.
Control
36
AMP-GAIN changeover for composite/S
15
AMP-GAIN changeover for component
35
Drive current changeover for composite/S
19
Drive current changeover for component
5
Mute control for composite/S
With pin 10 at LOW
With pin 10 at HIGH
12
Component mute control
9
Y/C-MIX control
10
Pin 11 input form changeover
13
Component LPF characteristics changeover
* Pin 2 is connected to GND at Y/C-MIX.
0 to 0.7V (LOW)
6dB
6dB
Two-system drive
Two-system drive
No mute
No mute
No mute
At composite
Clamp input
Interlace compatible
2.6 to 5V (HIGH)
9dB
9dB
Single-system drive
Single-system drive
Mute of pins 33, 31, and 28
Mute of pins 31 and 28
Mute of pins 25, 32, and 21
At Y/C-MIX
Pedestal clamp input
Progressive compatible
Pin 3
Pin 4
Pin 30 output DC
0 to 0.7V
0 to 0.7V
LOW (0V) → For 4:3 mode
0 to 0.7V
2.6 to 5V
MIDDLE (2.2V) → For the letter box mode
2.6 to 5V
0 to 0.7V
HIGH (5V) → For the squeeze mode
2.6 to 5V
2.6 to 5V
Prohibited
* The voltage to be applied to all control pins must not be higher than the one applied to VCC and lower than the one applied to GND.
* All of control pins must not be used in the OPEN state.
No.A0245-5/12
Share Link: 