CXD1916R View Datasheet(PDF) - Sony Semiconductor
Part Name
Description
Manufacturer
CXD1916R Datasheet PDF : 50 Pages
| |||
CXD1916R
Pin
No.
Symbol
46 AVDD1
47 AVSS1
48 C-OUT
49 VB
50 VG
51 Y-OUT
52 AVDD2
53 AVSS2
54 NC
55 NC
56 NC
57 NC
58 NC
59 NC
60 VSS8
61 TVSYNC
62 TD8
63 TD9
64 TD10
65 VDD4
66 XTEST
67
OSDSW/
XTEST1
68
ROSD/
XTEST2
69
GOSD/
XTEST3
70
BOSD/
XTEST4
71 XTEST5
72 SYNCM
73 PIXCON
74 VSS9
75 TDI
I/O
Description
— Analog power supply.
— Analog ground.
O 10-bit DAC output. This pin outputs the chroma (C), R and V signals.
O Connect to ground via a capacitor of approximately 0.1µF.
O Connect to analog power supply via a capacitor of approximately 0.1µF.
O 10-bit DAC output. This pin outputs the luminance (Y) and G signals.
— Analog power supply.
— Analog ground.
— Not connected inside the IC.
— Not connected inside the IC.
— Not connected inside the IC.
— Not connected inside the IC.
— Not connected inside the IC.
— Not connected inside the IC.
— Digital ground.
I Test pin. This pin is pulled up. Normally this pin should be open.
I/O Test data inputs/outputs. These pins should be open.
I/O In test mode, these are used for the internal circuit test data bus.
I/O The test data bus is available only for the device vendor.
— Digital power supply.
I
Test mode control. This pin is pulled up.
Normally this pin should be open.
I
These pins are pulled up. The functions of these pins are selected by XTEST
I (Pin 66).
When XTEST = High, these are OSD data inputs.
I When XTEST = Low, these are test mode control inputs.
The test mode is available only for the device vendor.
I
I Test pin. This pin is pulled up. Normally this pin should be open.
Master/slave switching. This pin is pulled up.
I When SYNCM = High, the CXD1916R is set to master mode.
When SYNCM = Low, the CXD1916R is set to slave mode.
I
Control register bit "PIX_EN" default value control.
This pin is pulled up.
— Digital ground.
I Test mode control input. This pin is pulled up.
–5–
Share Link: 