MC7410VU400LE View Datasheet(PDF) - Unspecified

Part Name

Description

Manufacturer

MC7410VU400LE

MPC7410 RISC Microprocessor Hardware Specifications

Unspecified 

Electrical and Thermal Characteristics

Table 6 provides the power consumption for the MPC7410.

Table 6. Power Consumption for MPC7410

Processor (CPU) Frequency

400 MHz

450 MHz

500 MHz

Unit Notes

Full-On Mode

Typical

Maximum

4.2

4.7

5.3

W

1, 3

9.5

10.7

11.9

W

1, 2

Doze Mode

Maximum

4.3

4.8

5.3

W

1

Nap Mode

Maximum

1.35

1.5

1.65

W

1

Sleep Mode

Maximum

1.3

1.45

1.6

W

1

Sleep Mode—PLL and DLL Disabled

Typical

600

600

600

mW

1

Maximum

1.1

1.1

1.1

W

1

Notes:

1. These values apply for all valid processor bus and L2 bus ratios. The values do not include I/O supply power (OVDD

and L2OVDD) or PLL/DLL supply power (AVDD and L2AVDD). OVDD and L2OVDD power is system dependent, but

is typically <5% of VDD power. Worst case power consumption for AVDD = 15 mW and L2AVDD = 15 mW.

2. Maximum power is measured at 105°C and VDD = 1.8 V while running an entirely cache-resident, contrived

sequence of instructions which keep the execution units, including AltiVec, maximally busy.

3. Typical power is an average value measured at 65°C and VDD = 1.8 V in a system while running typical benchmarks.

4.2 AC Electrical Characteristics

This section provides the AC electrical characteristics for the MPC7410. After fabrication, functional parts are

sorted by maximum processor core frequency, see Section 4.2.1, “Clock AC Specifications,” and tested for

conformance to the AC specifications for that frequency. The processor core frequency is determined by the bus

(SYSCLK) frequency and the settings of the PLL_CFG[0:3] signals. Parts are sold by maximum processor core

frequency; see Section 10, “Ordering Information.”

MPC7410 RISC Microprocessor Hardware Specifications, Rev. 6.1

Freescale Semiconductor

13

Share Link: