MC7410VU400LE View Datasheet(PDF) - Unspecified

Part Name

Description

Manufacturer

MC7410VU400LE

MPC7410 RISC Microprocessor Hardware Specifications

Unspecified 

Features

— Store gathering

— Executes the cache and TLB instructions

— Big- and little-endian byte addressing supported

— Misaligned little-endian supported

— Supports FXU, FPU, and AltiVec load/store traffic

— Complete support for all four architecture AltiVec DST streams

• Level 1 (L1) cache structure

— 32 Kbyte, 32-byte line, eight-way set-associative instruction cache (iL1)

— 32 Kbyte, 32-byte line, eight-way set-associative data cache (dL1)

— Single-cycle cache access

— Pseudo least-recently-used (LRU) replacement

— Data cache supports AltiVec LRU and transient instructions algorithm

— Copy-back or write-through data cache (on a page-per-page basis)

— Supports all PowerPC memory coherency modes

— Nonblocking instruction and data cache

— Separate copy of data cache tags for efficient snooping

— No snooping of instruction cache except for ICBI instruction

• Level 2 (L2) cache interface

— Internal L2 cache controller and tags; external data SRAMs

— 512-Kbyte, 1-Mbyte, and 2-Mbyte two-way set-associative L2 cache support

— Copy-back or write-through data cache (on a page basis, or for all L2)

— 32-byte (512-Kbyte), 64-byte (1-Mbyte), or 128-byte (2-Mbyte) sectored line size

— Supports pipelined (register-register) synchronous BurstRAMs and pipelined (register-register) late

write synchronous BurstRAMs

— Supports direct-mapped mode for 256 Kbytes, 512 Kbytes, 1 Mbyte, or 2 Mbytes of SRAM (either all,

half, or none of L2 SRAM must be configured as direct-mapped)

— Core-to-L2 frequency divisors of ÷1, ÷1.5, ÷2, ÷2.5, ÷3, ÷3.5, and ÷4 supported

— 64-bit data bus which also supports 32-bit bus mode

— Selectable interface voltages of 1.8 and 2.5 V

• Memory management unit

— 128-entry, two-way set-associative instruction TLB

— 128-entry, two-way set-associative data TLB

— Hardware reload for TLBs

— Four instruction BATs and four data BATs

— Virtual memory support for up to 4 hexabytes (252) of virtual memory

— Real memory support for up to 4 gigabytes (232) of physical memory

— Snooped and invalidated for TLBI instructions

• Efficient data flow

— All data buses between VRF, load/store unit, dL1, iL1, L2, and the bus are 128 bits wide

— dL1 is fully pipelined to provide 128 bits/cycle to/from the VRF

MPC7410 RISC Microprocessor Hardware Specifications, Rev. 6.1

Freescale Semiconductor

5

Share Link: