ST72321M6 ST72321M9
pins to ground.
3. OSC1 and OSC2 pins connect a crystal/ceramic resonator, or an external source to the on-chip oscil-
lator.
4. On the chip, each I/O port may have up to 8 pads. Pads that are not bonded to external pins are in input
pull-up configuration after reset. The configuration of these pads must be kept at reset state to avoid add-
ed current consumption.
5. In the open drain output column, “T” defines a true open drain I/O (P-Buffer and protection diode to VDD
are not implemented).
12/175