MC-4516CA726EF-A10 View Datasheet(PDF) - NEC => Renesas Technology

Part Name

Description

Manufacturer

MC-4516CA726EF-A10

16M-WORD BY 72-BIT SYNCHRONOUS DYNAMIC RAM MODULE UNBUFFERED TYPE

NEC => Renesas Technology 

MC-4516CA726

DC Characteristics (Recommended Operating Conditions Unless Otherwise Noted)

Parameter

Symbol

Test condition

Grade MIN. MAX. Unit Notes

Operating current

ICC1 Burst length = 1

tRC ≥ tRC(MIN.), IO = 0 mA

/CAS latency = 2 -A80

-A10

900 mA 1

900

/CAS latency = 3 -A80

900

-A10

900

Precharge standby current in ICC2P CKE ≤ VIL(MAX.), tCK = 15 ns

5

power down mode

ICC2PS CKE ≤ VIL(MAX.), tCK = ∞

Precharge standby current in ICC2N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),

non power down mode

Input signals are changed one time during 30 ns.

9 mA

9

180 mA

ICC2NS CKE ≥ VIH(MIN.), tCK = ∞

72

Input signals are stable.

Active standby current in

power down mode

Active standby current in

non power down mode

ICC3P CKE ≤ VIL(MAX.), tCK = 15 ns

ICC3PS CKE ≤ VIL(MAX.), tCK = ∞

ICC3N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),

Input signals are changed one time during 30 ns.

45 mA

36

270 mA

ICC3NS CKE ≥ VIH(MIN.), tCK = ∞

180

Input signals are stable.

Operating current

ICC4 tCK ≥ tCK(MIN.)

/CAS latency = 2 -A80

1,080 mA 2

(Burst mode)

IO = 0 mA

-A10

855

/CAS latency = 3 -A80

1,305

5

CBR (Auto) refresh current

ICC5 tRC ≥ tRC(MIN.)

-A10

/CAS latency = 2 -A80

1,125

2,070 mA 3

-A10

2,070

5

/CAS latency = 3 -A80

2,070

-A10

2,070

Self refresh current

ICC6 CKE ≤ 0.2 V

18 mA

Input leakage current

II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V

– 9 + 9 µA

Output leakage current

IO(L) DOUT is disabled, VO = 0 to 3.6 V

– 1.5 + 1.5 µA

High level output voltage

VOH IO = – 4 mA

2.4

V

Low level output voltage

VOL IO = + 4 mA

0.4 V

Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In

addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).

2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In

addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).

3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).

6

Data Sheet M14333EJ2V0DS00

Share Link: