MC-4516CA726PF-A10 View Datasheet(PDF) - Elpida Memory, Inc

Part Name

Description

Manufacturer

MC-4516CA726PF-A10

16M-WORD BY 72-BIT SYNCHRONOUS DYNAMIC RAM MODULE UNBUFFERED TYPE

Elpida Memory, Inc 

MC-4516CA726

DC Characteristics (Recommended Operating Conditions Unless Otherwise Noted)

Parameter

Symbol

Test condition

Grade MIN. MAX. Unit Notes

Operating current

ICC1 Burst length = 1

/CAS latency = 2 -A80

900 mA 1

tRC ≥ tRC(MIN.), IO = 0 mA

-A10

900

/CAS latency = 3

Precharge standby current in ICC2P CKE ≤ VIL(MAX.), tCK = 15 ns

power down mode

ICC2PS CKE ≤ VIL(MAX.), tCK = ∞

Precharge standby current in ICC2N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),

Enon power down mode

Input signals are changed one time during 30 ns.

ICC2NS CKE ≥ VIH(MIN.), tCK = ∞

Input signals are stable.

Active standby current in

ICC3P CKE ≤ VIL(MAX.), tCK = 15 ns

Opower down mode

ICC3PS CKE ≤ VIL(MAX.), tCK = ∞

Active standby current in

ICC3N CKE ≥ VIH(MIN.), tCK = 15 ns, /CS ≥ VIH(MIN.),

non power down mode

Input signals are changed one time during 30 ns.

LICC3NS CKE ≥ VIH(MIN.), tCK = ∞

-A80

-A10

900

900

9 mA

9

180 mA

72

45 mA

36

270 mA

180

Input signals are stable.

Operating current

(Burst mode)

P CBR (Auto) refresh current

r Self refresh current

o Input leakage current

Output leakage current

High level output voltage

d Low level output voltage

ICC4 tCK ≥ tCK(MIN.)

/CAS latency = 2 -A80

1,080 mA 2

IO = 0 mA

-A10

855

/CAS latency = 3 -A80

1,305

-A10

1,125

ICC5 tRC ≥ tRC(MIN.)

/CAS latency = 2 -A80

2,070 mA 3

-A10

2,070

/CAS latency = 3 -A80

2,070

-A10

2,070

ICC6 CKE ≤ 0.2 V

18 mA

II(L) VI = 0 to 3.6 V, All other pins not under test = 0 V

– 9 + 9 µA

IO(L) DOUT is disabled, VO = 0 to 3.6 V

– 1.5 + 1.5 µA

VOH IO = – 4 mA

2.4

V

VOL IO = + 4 mA

0.4 V

Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In

addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).

u 2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In

addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).

ct 3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).

6

Data Sheet E0057N10

Share Link: