OPF520 View Datasheet(PDF) - Optek Technology
Part Name
Description
Manufacturer
OPF520 Datasheet PDF : 9 Pages
| |||
Fiber Optic Receiver
OPF520 Series
Absolute Maximum Ratings
Storage Temperature
-55° C to +115° C
Operating Temperature
-40° C to +85° C
Lead Soldering Temperature (for 10 seconds)
260° C
Supply Voltage
-0.5 V to +7.0 V
Output Current
25 mA
Output Voltage
-0.5 V to +18.0 V
Open Collector Power Distribution
Fan Out (TTL)
Electrical/Optical Characteristics
4.75 ≤ VCC ≤ 5.25, Fiber Sizes ≤ 200µm, NA ≤ 0.35, TA = 25°C unless otherwise specified
SYMBOL
PARAMETER
MIN TYP MAX UNITS
40mW
5 (1)
CONDITIONS
IOH
High Level Output Current
VOL
Low Level Output Voltage
ICCH
Supply Current, Output High
ICCL
Supply Current, Output Low
5
250
0.2
0.5
3.5
6.3
6.9
10
µA VO = 18V, POC < -40 dBm, See Note 2
V IO = 8 mA, POC > +24 dBm, See Note2
mA VCC = 5.25 V, POC < -40 dBm, See Note 2
mA VCC = 5.25 V, POC < -24 dBm, See Note 2
POC(H)
Peak Input Power Level, Output High
(Guaranteed Output High)
-40
dBm
λp = 850 nm
0.1
µW
POC(L)
Peak Input Power Level, Output Low
(Guaranteed Output Low)
-25.4
2.9
-24
-9.2
dBm
λp = 850 nm, IO = 8 mA
120
µW
-10
dBm λp = 850 nm, IO = 8 mA
4.0
100
µW -40ºC ≤ TA ≤ +85ºC
tr, tf
Rise, Fall Time
30
ns
tPDHL Propagation Delay, Output High to Low
65
tPDLH Propagation Delay, Output Low to High
100
ns
POC = 20 dBm (peak), ƒ = 2.5 MHz, See Note 3
ns
PWD Pulse Width Distortion
±30
%
Notes:
1. 8mA load (5 x 1.6 mA), RL = 560 Ω
2. Use recommended test circuit below, but connect VO
to an independent voltage source with RL = 0.
3. Use recommended test circuit below.
Recommended Test Circuit
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue C 05/2013
Page 2 of 9
OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com
Share Link: 