MX29F1615 View Datasheet(PDF) - Macronix International

Part Name

Description

Manufacturer

MX29F1615

16M-BIT [2M x8/1M x16] CMOS SINGLE VOLTAGE FLASH EEPROM

Macronix International 

MX29F1615

DC CHARACTERISTICS = 0°C to 70°C, VCC = 5V±10%(CONTINUE P.15)

NOTES:

1. All currents are in RMS unless otherwise noted. Typical values at VCC = 5.0V, T = 25°C. These currents are valid for all product

versions (package and speeds).

2. ICC3 is specified with the device de-selected. If the device is read while in erase suspend mode, current draw is the sum of ICC3

and ICC1/2.

3. VIL min. = -1.0V for pulse width is equal to or less than 50ns.

VIL min. = -2.0V for pulse width is equal to or less than 20ns.

4. VIH max. = VCC + 1.5V for pulse width is equal to or less than 20ns. If VIH is over the specified maximum value, read operation

cannot be guaranteed.

AC CHARACTERISTICS READ OPERATIONS

SYMBOL

tACC

tCE

tOE

tDF

tOH

DESCRIPTIONS

Address to Output Delay

CE to Output Delay

OE to Output Delay

OE High to Output Delay

Address to Output hold

29F1615-90 29F1615-10

MIN. MAX. MIN. MAX.

90

100

90

100

50

50

0

35

0

35

0

0

29F1615-12

MIN. MAX. UNIT CONDITIONS

120 ns CE=OE=VIL

120 ns OE=VIL

60

ns CE=VIL

0

35

ns CE=VIL

0

ns CE=OE=VIL

TEST CONDITIONS:

• Input pulse levels: 0.45V/2.4V

• Input rise and fall times: 10ns

• Output load: 1TTL gate+100pF(Including scope and jig)

• Reference levels for measuring timing: 0.8V, 2.0V

NOTE:

1. tDF is defined as the time at which the output achieves the

open circuit condition and data is no longer driven.

P/N: PM0615

REV. 1.1, JUN. 15, 2001

16

Share Link: