MKL33Z128VLH4 View Datasheet(PDF) - NXP Semiconductors.

Part Name

Description

Manufacturer

MKL33Z128VLH4

Kinetis KL33 Microcontroller 48 MHz ARM® Cortex®-M0+ and 128/256 KB Flash

NXP Semiconductors. 

Freescale Semiconductor, Inc.

Data Sheet: Technical Data

KL33P64M48SF6

Rev. 5, 08/2015

Kinetis KL33 Microcontroller

48 MHz ARM® Cortex®-M0+ and 128/256 KB Flash

The KL33 series is optimized for cost-sensitive and battery-

powered applications requiring low-power segment LCD. The

product offers:

• Low power segment LCD up to 28x8 or 32x4

• Embedded ROM with boot loader for flexible program

upgrade

• High accuracy internal voltage and clock reference

• FlexIO to support any standard and customized serial

peripheral emulation

• Down to 54uA/MHz in very low power run mode and

1.96uA in deep sleep mode (RAM + RTC retained)

MKL33Z256Vxx4(R)

MKL33Z128Vxx4(R)

64 LQFP

10x10 mm P 0.5 mm

64 BGA

5x5 mm P 0.5 mm

Core Processor

• ARM® Cortex®-M0+ core up to 48 MHz

Memories

• 128/256 KB program flash memory

• 16/32 KB SRAM

• 16 KB ROM with build-in bootloader

• 32-byte backup register

System

• 4-channel asynchronous DMA controller

• Watchdog

• Low-leakage wakeup unit

• Two-pin Serial Wire Debug (SWD) programming and

debug interface

• Micro Trace Buffer

• Bit manipulation engine

• Interrupt controller

Clocks

• 48MHz high accuracy (up to 0.5%) internal reference

clock

• 8MHz/2MHz high accuracy (up to 3%) internal

reference clock

• 1KHz reference clock active under all low-power

modes (except VLLS0)

• 32–40KHz and 3–32MHz crystal oscillator

Peripherals

• Segment LCD supporting up to 28x8 or 32x4

segments

• One UART module supporting ISO7816, operating

up to 1.5 Mbit/s

• Two low-power UART modules supporting

asynchronous operation in low-power modes

• Two I2C modules and I2C0 supporting up to 1

Mbit/s

• Two 16-bit SPI modules supporting up to 24 Mbit/s

• One FlexIO module supporting emulation of

additional UART, IrDA, SPI, I2C, I2S, PWM and

other serial modules, etc.

• One serial audio interface I2S

• One 16-bit 818 ksps ADC module with high

accuracy internal voltage reference (Vref) and up to

16 channels

• High-speed analog comparator containing a 6-bit

DAC for programmable reference input

• One 12-bit DAC

• 1.2 V internal voltage reference

Timers

• One 6-channel Timer/PWM module

• Two 2-channel Timer/PWM modules

• One low-power timer

• Periodic interrupt timer

• Real time clock

Freescale reserves the right to change the detail specifications as may be required to

permit improvements in the design of its products. © 2012–2015 Freescale

Semiconductor, Inc. All rights reserved.

Share Link: