TS4962M(2005) View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
TS4962M Datasheet PDF : 32 Pages
| |||
Absolute Maximum Ratings
1 Absolute Maximum Ratings
TS4962M
Table 1. Key parameters and their absolute maximum ratings
Symbol
Parameter
Value
Unit
VCC
Supply Voltage(1), (2)
6
V
Vin
Input Voltage (3)
GND to VCC
V
Toper
Operating Free-Air Temperature Range
-40 to + 85
°C
Tstg
Storage Temperature
-65 to +150
°C
Tj
Maximum Junction Temperature
150
°C
Rthja
Thermal Resistance Junction to Ambient (4)
200
°C/W
Pdiss
Power Dissipation
Internally Limited(5)
ESD Human Body Model
2
kV
ESD Machine Model
200
V
Latch-up Latch-up Immunity
200
mA
VSTBY Standby Pin Voltage Maximum Voltage (6)
GND to VCC
V
Lead Temperature (soldering, 10sec)
260
°C
1. Caution: This device is not protected in the event of abnormal operating conditions, such as for example, short-
circuiting between any one output pin and ground, between any one output pin and VCC, and between
individual output pins.
2. All voltages values are measured with respect to the ground pin.
3. The magnitude of input signal must never exceed VCC + 0.3V / GND - 0.3V.
4. Device is protected in case of over temperature by a thermal shutdown active @ 150°C.
5. Exceeding the power derating curves during a long period, involves abnormal operating condition.
6. The magnitude of standby signal must never exceed VCC + 0.3V / GND - 0.3V.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
VCC
Supply Voltage(1)
2.4 to 5.5
VIC
Common Mode Input Voltage Range(2)
0.5 to VCC - 0.8
VSTBY
Standby Voltage Input: (3)
Device ON
Device OFF
1.4 ≤ VSTBY ≤ VCC
GND ≤ VSTB ≤ 0.4 (4)
RL
Load Resistor
≥4
Rthja
Thermal Resistance Junction to Ambient (5)
90
1. For VCC from 2.4V to 2.5V, the operating temperature range is reduced to 0°C ≤ Tamb ≤ 70°C.
2. For VCC from 2.4V to 2.5V, the common mode input range must be set at VCC/2.
3. Without any signal on VSTBY, the device will be in standby.
4. Minimum current consumption shall be obtained when VSTBY = GND.
5. With heat sink surface = 125mm2.
V
V
V
Ω
°C/W
2/32
Share Link: 