TS4962MEIJT View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
TS4962MEIJT Datasheet PDF : 41 Pages
| |||
TS4962M
3
Absolute maximum ratings
Absolute maximum ratings
Table 2. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VCC
Supply voltage (1) (2)
Vin
Input voltage (3)
6
V
GND to VCC
Toper
Operating free-air temperature range
-40 to + 85
Tstg
Storage temperature
-65 to +150
°C
Tj
Maximum junction temperature
150
Rthja
Thermal resistance junction to ambient (4)
200
°C/W
Pdiss
Power dissipation
Internally limited(5)
ESD Human body model
2
kV
ESD Machine model
200
V
Latch-up Latch-up immunity
200
mA
VSTBY Standby pin voltage maximum voltage (6)
GND to VCC
V
Lead temperature (soldering, 10 s)
260
°C
1. Caution: this device is not protected in the event of abnormal operating conditions, such as for example,
short-circuiting between any one output pin and ground, between any one output pin and VCC, and
between individual output pins.
2. All voltage values are measured with respect to the ground pin.
3. The magnitude of the input signal must never exceed VCC + 0.3 V / GND - 0.3 V.
4. The device is protected in case of over temperature by a thermal shutdown active @ 150 °C.
5. Exceeding the power derating curves during a long period causes abnormal operation.
6. The magnitude of the standby signal must never exceed VCC + 0.3 V / GND - 0.3 V.
Table 3. Operating conditions
Symbol
Parameter
Value
Unit
VCC
VIC
VSTBY
RL
Rthja
Supply voltage (1)
Common-mode input voltage range (2)
Standby voltage input: (3)
Device ON
Device OFF
Load resistor
Thermal resistance junction to ambient (5)
2.4 to 5.5
0.5 to VCC - 0.8
1.4 ≤ VSTBY ≤ VCC
GND ≤ VSTBY ≤ 0.4 (4)
≥4
90
V
Ω
°C/W
1. For VCC from 2.4 V to 2.5 V, the operating temperature range is reduced to 0 °C ≤ Tamb ≤ 70 °C.
2. For VCC from 2.4 V to 2.5 V, the common-mode input range must be set at VCC/2.
3. Without any signal on VSTBY, the device is in standby.
4. Minimum current consumption is obtained when VSTBY = GND.
5. With heat sink surface = 125 mm2.
DocID11703 Rev 6
5/41
41
Share Link: 