TS2012EI
Filter-free Flip Chip stereo 2 x 2.5 W class D
audio power amplifier
Datasheet - production data
LOUT-
STDBYL
PGND
ROUT-
Applications
Cellular phones
PDA
LOUT+
STDBYR
AGND
ROUT+
PVCC
G1
G0
AVCC
Description
The TS2012EI is a fully-differential stereo class D
power amplifier able to drive up to 1.15 W into an
8 load at 5 V per channel. It achieves better
efficiency compared to typical class AB audio
amps.
ILNILN++
LIN-
RIN-
RIN+
The device has four different gain settings utilizing
two digital pins: G0 and G1.
Flip Chip 16
Pin connection (top view)
Features
Operates from VCC = 2.5 to 5.5 V
Dedicated standby mode active low for each
channel
Pop and click reduction circuitry provides low
on/off switch noise while allowing the device to
start within 8 ms.
Two standby pins (active low) allow each channel
to be switched off separately.
The TS2012EI is available in a Flip Chip 16 bump
lead-free package.
Output power per channel: 1.15 W at 5 V or
0.63 W at 3.6 V into 8 with 1% THD+N max.
Output power per channel: 1.85 W at 5 V into
4 with 1% THD+N max.
Output short-circuit protection
Four gain setting steps: 6, 12, 18, 24 dB
Low current consumption
PSSR: 63 dB typ. at 217 Hz.
Fast startup phase: 7.8 ms
Thermal shutdown protection
Flip Chip 16 bump lead-free package
Table 1. Device summary
Order code
Temperature range
Package
Packing
Marking
TS2012EIJT
- 40 °C to +85 °C
Flip Chip 16
Tape and reel
K0
April 2014
This is information on a product in full production.
DocID026152 Rev 1
1/32
www.st.com